SIP PERFORMANCE 2.0 from JL EXHAUSTS - handmade left-hand Racing Exhaust for Vespa Engines with strong torque, early power delivery and a wide range of applications.
The SIP PERFORMANCE 2.0 was a clear response to the racing exhaust systems from SCOOTER&SERVICE and DSE, which had set new standards in 200cc tuning. The exhaust was developed together with an exhaust specialist who had already successfully equipped 150-meter sprinters in the scooter scene and who was devoting himself intensively to the Vespa exhaust for the first time with this project. The result is a Racing Exhaust that has been designed for both classic road set-ups and powerful high-end engines and unleashes enormous potential depending on the Engine power.
- Racing Exhaust with early power delivery and strong torque
- Handmade by JL EXHAUSTS in stainless steel or steel
- Centre Stand and wide tires can still be ridden
- Various bolt-on silencer variants available
The body of the SIP PERFORMANCE 2.0 has been completely redeveloped and made significantly more voluminous. Nevertheless, it remains suitable for everyday use, as the Centre Stand and wide tires can still be used. The Exhaust is handcrafted by JL EXHAUSTS, optionally made of stainless steel or steel with Clear Lacquer as rust protection. The Exhaust Manifold is suspended on both sides with Springs and the Holder on the Traverse is designed to withstand the vibrations generated by the Silencer. The Exhaust can be used with standard cylinders as well as with road or bottom-end tuned Engines. Depending on the set-up, outputs of between 18 and 32 hp and speeds of 110 to 150 km/h are possible.
Its particular strength lies in its characteristics: the SIP PERFORMANCE 2.0 is very high-torque and shows no loss of power in any gear. Compared to a NEWLINE or DSE, it kicks in earlier and pulls the power through to fourth gear much more harmoniously with the same peak power. The Exhaust is available with various bolt-on silencer versions made of carbon, black aluminum or stainless steel. Other SIP Silencers and the S&S Silencer also fit the system.
Another plus point is the JL EXHAUSTS warranty: if the Exhaust breaks within three years of purchase, it will be repaired or replaced for first-time owners who bought it from SIP. Damage caused by external influences is of course excluded.
The Exhaust is hand-welded from stainless steel or steel from many segments and combined with a Fitting Silencer made of aluminum, stainless steel or carbon. The Springs are rubber-coated. Mounting with wide tires and a Centre Stand is possible without any problems, although there may be problems with Replacement Parts Centre Stands in individual cases. It is not possible to fit a spare wheel. The jetting and ignition settings must be checked and optimized after fitting.
Technical details
- Racing Exhaust
- Stainless steel or steel
- Silencer made of aluminum, stainless steel or carbon
- Lefthand
Conclusion: The SIP PERFORMANCE 2.0 is one of the most powerful exhaust solutions in the SIP range for tourers and high-end fans alike.
SIP TIP:
- With the SI Carburettor, the Main Jet should be selected at least ten sizes larger. MALOSSI 210, COSA Clutch, racing or Long Stroke Crankshaft and a modified Cylinder Head are sensible additions. SIP PERFORMANCE Ignition, diaphragm carburetor with 30 to 36 mm, Flowed Crankshaft and other tuning components will then take the Engine towards the 30 hp mark.
Opinions of the press and experts
"My road-tuned PX200 with 210 MALOSSI, long-stroke and 24-SI Carburettor produces a whopping 21.2 hp at 23.3 Nm with the "2.0" during the test runs. Unbelievable. The Exhaust has brutal power."
-SIP man Alex, 02/2013
"My 210 with 30 mm Carburettor has an increase over the old SIP PERFORMANCE NG from 22.5 hp to 26.6 hp. That's 4 hp just from the Exhaust. The torque has also increased by 2.9 Nm. The scooter has power like a tractor."
-SIP man Robert, 02/2013
"I was skeptical as to whether the SIP PERFORMANCE 2.0 would actually increase performance by around 3 hp as described and decided to test it myself. Woooow! I got goosebumps as soon as I set off. The torque in the lower rev range is insane and cannot be compared with the old SIP PERFORMANCE. Fun is guaranteed at every speed."
-SIP man Max, 09/2013
Note: JL EXHAUSTS has been facing significantly higher material and labor costs for some time now. In addition, tariffs, bureaucratic requirements, and a shortage of skilled workers are driving up production costs. As a result, prices have been adjusted effective 07/2025. For the most popular racing exhaust systems, we were able to partially offset the elevation; however, certain models will be permanently discontinued.
The exhaust systems continue to be handcrafted in Europe. Low noise levels, high durability, clean welds, and high-quality materials such as stainless steel continue to characterize these systems.
