Name: Tuning Chip E-Bike PEARTUNE MSO 4.0
Brand: PearTune
SKU: EB100452
Price: 175 EUR

Product image Nr. 0 for 'Tuning Chip E-Bike PEARTUNE MSO 4.0'

for E-Bikes/Pedelecs with Engine BAFANG M200/M300/M400/M420 with CAN Bus, 4 Pin Speedsensor

for display: all with CAN Bus

Show all matching vehicle models

Assembly: invisible at the drive motor
displayed: actual values
activation: light-key 2x & + or + - key
controls: display
electric assistance 25-99 km/h
Max. Speed: adjustable
18x15x13 mm

Not StVZO approved! Liability, warranty & guarantee from dealer/manufacturer expires or is severely restricted.

Free shipping

€175.00

VAT included

50g / Piece

Product description

The tuning module MSO by PearTune for E-Bikes and Pedelecs with BAFANG M200/M300/M400/M420 motors and CAN Bus.

Full throttle ahead! This is exactly what the abbreviation "MSO" (Max Speed Off) of the Czech manufacturer PearTune stands for. The tuning module MSO 4.0 for BAFANG engines with CAN bus removes the 25 km/h speed limit. The module is installed invisibly on the engine and activated or deactivated via the operating buttons on the display. The tuning module MSO 4.0 for BAFANG engines with CAN bus can be used with all displays for M300, M400 and M420.

25 km/h limitation is lifted
Activation via display
Correct speed is displayed

The functions of the tuning module MSO 4.0 by PearTune for BAFANG engines with CAN bus:

"9.9" on the display means that tuning is activated. After switching off, the display "2,5" confirms the deactivation.
The tuning can be switched on and off as desired. The light key or the +- keys are used for this.
All values, including the current speed, are always displayed correctly.
After installation, the tuning module MSO 4.0 for BAFANG engines with CAN bus configures itself.

Attention: Can only be used with bikes from BULLS. Otherwise, make sure that the 4 PIN speed sensor is on the motor with the display connector on E-Bikes with M200, M300, M400 and M420 drives.

Note: With new BAFANG E-Bikes you should have ridden about one kilometre before installing the tuning module.

Installation of the tuning module MSO 4.0 for BAFANG motors with CAN bus

The module is connected directly to the engine. The cover of the engine must be removed during installation. Then all cable connections are exposed. An English manual can be downloaded here.

Conclusion: With the tuning module MSO 4.0 for BAFANG engines with CAN bus you get a completely new driving experience.

Our ideas for easy installation and a pleasant ride- SIP Tip:

Backpacks and bags are extremely practical
The matching helmet is available here
Everything in view with this holder for your smartphone

ATTENTION: To avoid mistakes during installation, please read the product descriptions and Instruction Manuals that are available for your Tuning Chip. You can find additional information in this blog: E-bike tuning and software updates.

Hersteller/Manufacturer: PearControl s.r.o. Príkopy 1889 393 01 Pelhrimov - Czech Republic www.pear-control.com

Here you will find everything you need to know about BAFANG !