If you want to replace your historic plate rectifier with a modern bridge rectifier, you can do this with the Wire Kit Rectifier for Vespa GS160/GS4 without any further modifications to the vehicle.

Virtually all original rectifiers on Vespas from the 60s and 70s only work to a limited extent or are completely defective due to obsolescence.

Simply remove the old rectifier and fit the bridge rectifier in the same place in the rectifier housing.

The required wires are already plugged into the correct position on the rectifier. The Wire colors correspond to those of the original Wiring Loom and can therefore be fitted directly to the rectifier housing with the matching Wiring Loom cables.

The white Wire is connected to the scooter ground, i.e. to the center Pin, which also holds the Rectifier.

• Green = direct current plus to the ignition lockBlack
• = alternating current from the alternator (2×)