With the VOLspeed tuning module, it isn’t just possible for the speed limit of BOSCH e-bikes and pedelecs to be raised; the VOLspeed 3 tuning module also offers further interesting functions.
Since 2018, the company VOLspeed from Ehekirchen in Bavaria has been one of the leading manufacturers of innovative tuning modules for e-bikes, pedelecs and S-pedelecs. With the VOLspeed 3 tuning module for e-bikes and pedelecs with BOSCH motor, a further development is now available on the German market with possibilities for optimisation that are unique: All the settings, such as the speed limit, throttle control and wheel circumference can be made conveniently using the display. A PC or smart phone are no longer required. Moreover, in the “dynamic mode”, the motor output is no longer abruptly reduced at the maximum assistance, which considerably reduces the unwelcome “wall effect”.
- Easy to fit, quick installation, invisible from the outside
- Dynamic mode reduces the “wall effect”
- Individual activation code.
The tuning module for e-bikes with BOSCH motors
The VOLspeed tuning module is suitable for the following BOSCH motors: Active Line, Active Line Plus, Performance Line and Performance Line CX drives up to model year 2021. The Classic motors, model year 2013 or older are not supported. Compatible with the displays Purion, Intuvia, Kiox, Nyon and the new Nyon 2021 (BUI350).
Functions of the VOLspeed V3 tuning module
An overview of the key functions of the VOLspeed 3 tuning module for e-bikes, S-pedelecs and pedelecs with a BOSCH drive train
- The individual activation code prevents the tuning program is used by unauthorised persons.
- When the e-bike or pedelec is initialised, the tuning is deactivated by default.
- The tuning can be activated and deactivated using the buttons on the handlebars.
- The maximum motor assistance, or maximum throttle control speed, can be set to a value of between 25 and 99 km/h. The set value is saved.
- Selecting “Dynamic Mode” softens the “wall effect”. The motor assistance is also available at higher speed ranges.
- Correct display of the speed and kilometres travelled.
- When the tuning is active, the corrected calculation of the range takes place. The driving style, battery use and set assistance level are taken into account.
- Following the removal of the module, the total mileage is correctly maintained.
- In "workshop mode" the module is completely deactivated.
- 4-second interval display: Range and battery charge level are displayed alternately.
Installation, activation and control of the VOLspeed 3 tuning module
It is no problem to fit the VOLspeed V3 tuning module to the BOSCH motor. Its activation and control take place via the display, and its removal should be possible without leaving wear marks.
Installation
Expect to spend between 15 and 30 minutes. Depending on the bike, different tools are needed, but usually an ISIS crank puller and a TX20 Torx spanner. Cable connections only need to be plugged in, otherwise no modifications to the motor are necessary. The VOLspeed V3 tuning module is not visible after installation, it disappears completely under the engine cover. Click here for the videos:
Activation & Control
Neither a PC nor smart phone are required, the VOLspeed 3 tuning module is ready for use immediately following installation and is configured via the display. The tuning can be controlled very easily via the display while driving, and can also be activated and deactivated.
Please note: An individual activation code cannot be used when using COBI or Smartphone Hub!
Removal
Thanks to the plug-in connections, the removal is generally as straightforward as the installation. There should be no visible damage to the e-bike or pedelec.
Conclusion: The latest generation of VOLspeed tuning modules for BOSCH drives.
Our ideas for easy installation and a pleasant ride – the SIP TIP:
Saving Tip:
We include the puller foot pedal free of charge in the e-bike tuning module set. This tool is needed to pull off the cranks of e-bikes quickly and easily.
