What are the advantages of the foot pegs?

• Extremely stable & rustproof due to the use of stainless steel
• Compatible with all motorbike footrests that are fixed with an M8 screw
• Can be spaced out to suit own requirements (e.g. pullstarter)
• Suitable for Ciao but also compatible with Piaggio Si, Bravo , Boxer (see instructions)

Scope of delivery & facts

1x CNC turned footrest axle made of stainless steel

1x CNC machined stainless steel distance bushing

5x 26x16x1mm stainless steel washers for spacers

2x CNC turned foot pegs made of aluminium in black anodised incl. M8 screw for fixing to the foot peg axle

Spacing is necessary if you have a pullstarter and want to have more space on the side of the footrest or if you want to use the kit on a Si , Bravo , Boxer etc.

Mounting instructions

• The footrest axle is pushed through the frame on the opposite side of the side stand. The prerequisite is that the treadles and the axle with the chainring have been removed.
• On the side stand side, the side stand is then pushed over the axle and the spacer sleeve is put on.
• Next, the m8 screw is unscrewed from the foot pegs (the washers can be discarded) and the black plastic cover of the foot pegs is removed.
• Then screw the screw in from the inside out and secure it with thread locker.
• Now replace the plastic cover and the foot pegs and screws can be screwed into the axle.
• The spacer washers are used as required and according to taste.
• If you want to fit the MCMFK to a Si, Bravo or Boxer, it may be necessary to omit the spacer sleeve and/or use all the washers. This is not a problem, but the MCFMK was originally developed for the Ciao with side stand.

Don't forget - The SIP-TIP:

• Thread locker is required for assembly
• The starter cable replaces the missing crank drive