Select scooter type
Select manufacturer
Select model
Product image for 'Tuning Kit MALOSSI Road 75 cc 2-holeTitle'
Tuning Kit MALOSSI Road 75 cc 2-hole for Vespa PK50/S
Part no.: 10302000
€599.00
VAT included
8kg / Piece
Product image Nr. 0 for 'Tuning Kit MALOSSI Road 75 cc 2-hole'

Tuning Kit MALOSSI Road 75 cc 2-hole

One rating
Part no.: 10302000

for Vespa PK50/​S

Show all matching vehicle models
  • Engine type: 50cc, Smallframe
  • Ø 47mm
  • stroke 43mm
  • Pin 12mm
  • with Cylinder Head
  • with carburettor kit 16.16, racing exhaust, primary driven gear, etc.

TUNING ROAD - suitable for everyday use


For race use only. Not admitted in the area of the German StVZO!
€599.00
VAT included
8kg / Piece

Product description

Tuning Kits: The Easy Way into Vespa Tuning

 

The tuning jungle is big, the range of products available is massive and the possibilities are almost infinite. Over the years, a range of most wanted combinations have crystallised in the area of road tuning which fulfil the same requirements: a clear increase in performance, a better exhaust performance and higher top speed, good durability, easy installation, no or limited changes to the engine case, conversion-back possibility, and a good price performance ratio.

 

The Tuning Kits include most customers' and the SIP team's favourite combinations. They are a very good upgrade for the corresponding engine. They are sporty but great for touring use at the same time. They include all the necessary small components and are therefore the ideal first step for anyone with no previous knowledge of tuning whatsoever.

 

The ROAD Kit is the starter kit. With this kit, attention has been paid to providing a low cost package which still provides superior acceleration and a higher top speed.

 

The SPORT Kit contains a high rev cylinder and frequently includes a bigger carburettor. This results in more power and higher speed. The carburettors mostly come without separate lubrication. Those who mix themselves know what happens in the combustion chamber.

 

The carb. jetting is an approximate value and at 0 m above mean sea level, Hamburg differs from the alps. Both kits represent a sound basis for further tuning. This is always associated with a change of crankshaft, however, which involves opening the engine. If the engine is already old and has done a lot of kilometres, an engine overhaul is recommended. If you're going to open the engine, you are advised to take the opportunity to extend your tuning job to include the crankshaft and gear components.

 

Conclusion: Tuning kits enable beginners to save money and stress and to benefit from the tuning experience the SIP team has gained over many years.

With the 50cc standard cylinder busy roads are a dangerous place to be and you may just find yourself being overtaken by the postman on his push bike! To this end there are two reliable and powerful kits, both of which can be used with the original 50cc crankshafts. The 75cc kit is a powerful ROAD kit is with MALOSSI cylinders. The 112cc is the most powerful kit and it can also be used with the original 50cc crankshaft. The V50 Kit includes a Banana exhaust (75cc)/MALOSSI Banana (112cc); the kit for PK models include a SITO Plus (75cc)/POLINI Banana (112cc). The 75cc kit with 3-hole manifold is supplied with PK XL2 clutch friction plates. Both kits are 'plug&play' tuning kits and do not involve changing the engine case.

 

ROAD KIT MALOSSI 75cc: racing cylinder MALOSSI 75cc, carburettor kit MALOSSI SHB 16.16, racing exhaust FACO Banana/SITO Plus, primary gear cog 16 teeth, reinforced clutch plates, spark plug, 2 main jets, nut/washer clutch/primary gear cog, ignition timing approx. 17°

 

SPORT KIT MALOSSI 112cc: racing cylinder MALOSSI 112cc, carburettor kit SHB 19.19, racing exhaust MALOSSI (V50)/SIP ROAD Banana (PK), primary gear ratio 3.00, reinforced PK XL2 clutch, spark plug, 3 main jets, nut/washer clutch+primary gear cog, ignition timing approx. 17°

 

 

SIP-TIP: A SIP PERFORMANCE by VAPE is a perfect add-on and is also perfect for subsequent tuning steps. If you open up the engine, you should take the opportunity to install a racing crankshaft

EAN Number: 4260438371875
Hersteller/Manufacturer: Malossi S.p.A. Via Roma, 118/I 40012 Calderara di Reno (Bologna) - Italy www.malossi.com

Customers also searched for this product with:

Product video

voucher online banner

Digital SIP Gift Voucher for Vespa & scooter riders

immediately by email to the recipient

A woman receives medical care in a treatment room.

SIP AID

HELP scooter riders!

Product fits

Detailed view of 3 silver-coloured metal engine parts from SIP.

News for you

Discover great new products!

Reviews Reviews

Notepad Notepad

Questions & answers Questions & answers

Downloads

Product information

Technical tips

29428412038-6bae4bd742-z
SIP Scootershop Visit our store

Are you a specialist retailer or would you like to become one?

SIP Chatbot

Our chatbot needs JavaScript to chat with you. Either it’s taking a moment, or you’ve disabled JavaScript.

×