Setting the tuning module SpeedBox 3.0 B.Tuning for OLI drives
You activate the SpeedBox 3.0 chip with the display or the app. After pressing Mode-Walk, the display briefly shows 9.9 km/h. Now you can drive at unlimited speed. Now you can drive at unlimited speed. Press Mode-Walk again to end the chip function. The display shows 2.5 km/h and the speed limit is switched on again. Your e-bike functions as if the chip had not been installed at all.
Or you can use the key combination ? ? ? ? to switch the module on and off.
If you are using the app for the first time, you will be asked to enter a PIN, which you will then use every time you start the app. You will also need to create a service password, which will be used if you forget your PIN or want to change it.
To set the maximum speed, shift down three times and then shift up three times. The current speed limit is displayed. To change the maximum speed, briefly press the LIGHT button or turn the rear wheel 360°. The last limit displayed is saved after a five-second pause.
The Tuning Module and the SpeedBox App
The app specially developed for SpeedBox 3.0 B.Tuning uses Bluetooth to connect the e-bike to your smartphone. After downloading the app and connecting the smartphone to the e-bike, you can see the current data and other values on your mobile phone. You can save trips, compare them with friends and track your own progress. This way you can enjoy the ride to the fullest and look at all the data later at your leisure.
What the app can do:
- Control tuning
- Set the speed
- Save and view trip data
- Switch off tuning
- Engine lock
- Engine diagnostics
SpeedBox B.Tuning is not absolutely necessary to use the SpeedBox App. But it will give you a complete overview of your data, progress and performance.
Feel free to download the SpeedBox App to your mobile phone even before you receive the SpeedBox 3.0 B.Tuning. The demo version can be tested with all functions and you can also check whether the app works with your smartphone. Your mobile phone must have Bluetooth 4.0 or higher.
Google Play
App Store
Assembly and disassembly
To connect the SpeedBox 3.0 B.Tuning to an e-bike, use the colour plugs that come with a key for correct connection, so installing the chip is really easy. After the battery is removed, the connections on the motor are exposed. Remove all connections from the motor to the sensor and to the display, then connect the SpeedBox 3.0 B.Tuning in between. Just follow the colours and nothing can go wrong.
This video will also help you.
Note: If the tuning module is installed on a brand new e-bike, you should have ridden the bike at least one kilometre beforehand.
Conclusion: With the SpeedBox 3.0 B.Tuning for YAMAHA PW drives, nothing stands in the way of a high-speed ride. And with the app you can check what you have achieved.
