The connection

Our SIP LED indicators are relatively simple to install on your scooter. On the 125/150cc models the front pair have a plug & play mounting. On the 50cc models however this type of illumination is not yet standard equipment and they will require the adapter cable that is included in the kit to function correctly. The rear pair require this adapter cable to be connected on all models. The yellow cable in the kit is then connected to the yellow/black rear light cable from the scooters existing wiring.

On some models, produced since the introduction of the Euro IV regulations, the running lights bulbs will blink when the indicator is activated. This can be rectified by rearranging the cables within the cable connector block. First remove the red cap and with the use of a very thin slotted screwdriver push both cables out to swap their positions during reinsertion.

Conclusion: Simple replacement and upgrade of the indicator units, ensuring an improved appearance and increased passive safety in the urban jungle!

The complementary components for these indicator kits - our SIP-TIP:

• For an ideal combination, indicators should be replaced at both the front and the rear.
• Why not expand the LED illumination with a suitable LED headlight?
• To complete the look, do not forget to order a LED rear light unit!