CNC-machined Axle Seating from SIP PERFORMANCE – Made in Italy and compatible with FORMULA radial brake calipers on modern Vespa Models.

The high-precision CNC-machined Axle Seating from SIP PERFORMANCE is “Made in Italy” and compatible with FORMULA radial brake callipers. It enables the installation of a radial brake calliper and elevates the Vespa’s braking system to a significantly sportier level.

• CNC-machined in Italy
• Compatible with FORMULA radial brake calipers
• For sporty braking performance and a race-inspired look
• Oversized Brake Discs up to 260 mm are possible

Using a radial Brake Calliper allows you to achieve braking performance typically found on modern sport motorcycles. The advantage of this Axle Seating is that the components are tailored to the Vespa’s intended use and weight. Unlike some oversized aftermarket brake systems, the SIP PERFORMANCE Axle Seating with matching Brake Calliper delivers not only powerful braking performance but also a sporty, race-inspired look.

This seating allows for the use of an oversized Brake Disc. Brake Discs with diameters up to 260 mm can be used with the appropriate Spacers. For Brake Discs 250 mm and larger, a recessed Ventilation Screw (Part No. BRK00500) is required to prevent the Rim from rubbing against the Brake Caliper.

Installation of the original ABS or Speed Sensor remains possible. However, the original speedometer mechanism from Models up to 2013 can no longer be used. In this case, you must switch to the digital Speed Sensor from KOSO.

Both versions of the Axle Seating can also be installed on Primavera/Sprint models. However, this requires conversion to a GTS front wheel hub and a 220 mm Brake Disc.

The axle seating is supplied with pre-installed high-quality bearings.

Conclusion: The SIP PERFORMANCE Axle Seating is the high-quality foundation for a modern radial brake system with powerful deceleration and a sporty look.