AC Wiring Loom from SIP Performance for the Vespa PX80-200 E Lusso.
If you purchase a SIP Speedometer/Rev Counter and a SIP Performance VAPE Ignition for your scooter, you can use a SIP Performance Wiring Loom to plug & play almost all the connections for the Speedometer/Rev Counter and Ignition. No more tedious searching for the right Wire from which, for example, the power supply for the speedometer can be disconnected.
- Simple Plug & Play installation for speedometer and Ignition
- High-quality workmanship and materials from German production
- Optimum integration into the scooter without subsequent adjustments
The AC versions of the SIP Performance Wiring Looms are designed for concepts without a Battery. Subsequent conversion to direct current (full DC) is not possible. In this case, please use the DC versions of the Wiring Loom.
The AC Wiring Loom for Vespa PX80-200 E Lusso provides the power supply for the speedometer black box in the front part of the scooter. The connection cable is designed so that it can be routed both in the Handlebar and under the Horn Cover. This means that the black box can be installed in the desired position on the scooter, depending on space and preference.
Further features of the SIP Performance AC Wiring Loom:
Caution: Always handle the plugs for the SIP Speedometer/Rev Counter with extreme care and NEVER pull in the Wiring Loom using these plugs or cables! These wires only have a cross-section of 0.5 mm and - like the plugs - are not designed to absorb large forces.
The black ground cable to the Engine with 6 mm eyelet must be connected to the VAPE CDI. Either Screw it directly onto the CDI or screw it to the Crankcase if the CDI has been fitted with the earth cable (58484031). We always recommend installing the separate ground cable.
A VAPE-Classic Voltage Regulator can be installed with the corresponding Wiring without having to re-crimp the plugs.
Conclusion: The perfect plug & play solution for all those who do not want to delve deeper into scooter electrics, but would like to "plug together" according to instructions.
This product also fits - SIP Tip:
Note: This Wiring Loom can optionally also be operated without Horn Rectifier and then with a 12V AC snare. Only a small modification is necessary for this: 4 wires are provided for connecting the Horn Rectifier: 2 times green-black, one time gray and one time black. To operate a 12V AC snare, these wires must be connected as follows: Connect one of the green-black wires (no matter which one) to the gray wire. Connect the other green-black Wire to the black Wire. The Light Switch 23185200 must also be used with a 12V AC snare.
