Select scooter type
Select manufacturer
Select model
Product image for 'Tuning Kit MALOSSI Road 75 cc 2-holeTitle'
Tuning Kit MALOSSI Road 75 cc 2-hole for Vespa PK50/S
Part no.: 10302000
€599.00
VAT included
8kg / Piece
Product image Nr. 0 for 'Tuning Kit MALOSSI Road 75 cc 2-hole'

Tuning Kit MALOSSI Road 75 cc 2-hole

One rating
Part no.: 10302000

for Vespa PK50/​S

Show all matching vehicle models
  • Engine type: 50cc, Smallframe
  • Ø 47mm
  • stroke 43mm
  • Pin 12mm
  • with Cylinder Head
  • with carburettor kit 16.16, racing exhaust, primary driven gear, etc.

TUNING ROAD - suitable for everyday use


For race use only. Not admitted in the area of the German StVZO!
€599.00
VAT included
8kg / Piece

Product description

Tuning Kits: The Easy Way into Vespa Tuning

 

The tuning jungle is big, the range of products available is massive and the possibilities are almost infinite. Over the years, a range of most wanted combinations have crystallised in the area of road tuning which fulfil the same requirements: a clear increase in performance, a better exhaust performance and higher top speed, good durability, easy installation, no or limited changes to the engine case, conversion-back possibility, and a good price performance ratio.

 

The Tuning Kits include most customers' and the SIP team's favourite combinations. They are a very good upgrade for the corresponding engine. They are sporty but great for touring use at the same time. They include all the necessary small components and are therefore the ideal first step for anyone with no previous knowledge of tuning whatsoever.

 

The ROAD Kit is the starter kit. With this kit, attention has been paid to providing a low cost package which still provides superior acceleration and a higher top speed.

 

The SPORT Kit contains a high rev cylinder and frequently includes a bigger carburettor. This results in more power and higher speed. The carburettors mostly come without separate lubrication. Those who mix themselves know what happens in the combustion chamber.

 

The carb. jetting is an approximate value and at 0 m above mean sea level, Hamburg differs from the alps. Both kits represent a sound basis for further tuning. This is always associated with a change of crankshaft, however, which involves opening the engine. If the engine is already old and has done a lot of kilometres, an engine overhaul is recommended. If you're going to open the engine, you are advised to take the opportunity to extend your tuning job to include the crankshaft and gear components.

 

Conclusion: Tuning kits enable beginners to save money and stress and to benefit from the tuning experience the SIP team has gained over many years.

 

With the standard 50-cc Cylinder, performance remains modest. For more power, there are two reliable kits available, both of which can be used with the original 50-cc Crankshaft.

 

The MALOSSI 75 cc ROAD KIT is designed as a powerful everyday setup. The MALOSSI 112 cc SPORT KIT is the more powerful option, which can still be combined with the original 50 cc Crankshaft. Both kits are designed for plug-and-play installation and do not require any modifications to the Crankcase.

 

For V50 models, depending on the kit, a FACO or MALOSSI banana is included; for PK models, a SITO Plus or a SIP ROAD banana is included. The 75-ccm kit with a 3-hole Intake Manifold is shipped with PK XL2 Clutch Friction Plates.

MALOSSI 75 cc ROAD KIT

  • MALOSSI 75 cc Racing Cylinder
  • MALOSSI SHB 16.16 Carburettor Kit
  • FACO Banana or SITO Plus Racing Exhaust
  • Primary Driven Gear Z 16
  • Reinforced Clutch Friction Plates
  • Spark Plug
  • 2 Main Jets
  • Nut and Locking Washer for Clutch and Primary Driven Gear
  • Ignition timing approx. 17°

MALOSSI 112 cc SPORT KIT

  • MALOSSI 112 cc Racing Cylinder
  • SHB 19.19 Carburettor Kit
  • MALOSSI Racing Exhaust for V50 or SIP ROAD banana exhaust for PK
  • Primary gear ratio 3.00
  • Reinforced PK XL2 Clutch
  • Spark Plug
  • 3 Main Jets
  • Nut and Locking Washer for Clutch and Primary Driven Gear
  • Ignition timing approx. 17°

These products are a perfect fit – SIP TIPS:

  • A SIP PERFORMANCE by VAPE Ignition is a sensible addition and provides a solid foundation for future tuning steps. If the engine is being disassembled anyway, we recommend installing a racing crankshaft.
EAN Number: 4260438371875
Hersteller/Manufacturer: Malossi S.p.A. Via Roma, 118/I 40012 Calderara di Reno (Bologna) - Italy www.malossi.com

Customers also searched for this product with:

Product video

voucher online banner

Digital SIP Gift Voucher for Vespa & scooter riders

immediately by email to the recipient

A woman receives medical care in a treatment room.

SIP AID

HELP scooter riders!

Product fits

Detailed view of 3 silver-coloured metal engine parts from SIP.

News for you

Discover great new products!

Reviews Reviews

Notepad Notepad

Questions & answers Questions & answers

Downloads

Product information

Technical tips

29428412038-6bae4bd742-z
SIP Scootershop Visit our store

Are you a specialist retailer or would you like to become one?

SIP Chatbot

Our chatbot needs JavaScript to chat with you. Either it’s taking a moment, or you’ve disabled JavaScript.

×