What are the advantages of the HC1 brake master cylinders?

• The compact HC1 brake lever assembly from MAGURA
• Precise braking and clutching, rich and direct pressure point
• Decoupled fluid reservoir in various sizes
• Diagonal-radial inclination of the lever, completely in black
• Ideal ergonomics and outstanding, detailed workmanship

HC1 - THE COMPACT

70° RADIAL DESIGN

The pressure rod and cylinder are at a 70° angle to the handlebar. This results in lower transmission losses and a more direct brake feel for better control.

ABS COMPATIBILITY

MAGURA HCT is suitable for use with all ABS systems currently on the market. (as of 01.2016)

ADVANCED SEAL TECHNOLOGY

This innovative technology reduces or prevents the ingress of air into the hydraulic system. This can be the case under extreme conditions, such as those encountered in racing.

FLUID RESERVOIR KIT

The fitting is supplied with a fluid reservoir external kit and bracket. Thanks to its compact dimensions, installation should be possible in almost all cases. The smoked glass used makes it easy to check the fluid level at any time

SCOPE OF DELIVERY

Each HC1 is supplied ready for installation with the following packaging contents:

• Banjo bolt with sealing rings (M10 x 1)
• Decoupled fluid reservoir
• Standard clamp (without mirror bracket)
• Brake light or start safety switch
• ABE for brake lever assemblies
• User manual

Don't forget - our SIP-TIP:

• The hydraulic brake master cylinder is filled with brake fluid, so be sure to order this as well.