Mirror Handlebar Ends from HIGHSIDER for Vespa Models. Slim mirror solution with a sporty look and good suitability for everyday use in city traffic.
If you don't like the original mirrors, you can convert to HIGHSIDER Mirror Handlebar Ends. Thanks to their usually slim design, the overall width of the Handlebar is hardly increased, so that it is still possible to get through traffic jams or city traffic without any problems. The mirrors can be mounted either facing upwards or downwards. When mounted facing downwards, the field of vision to the rear is usually slightly better. A suitable Mounting Kit is also required for mounting.
Fitting instructions for Vespa GTS, GTS Super, GTV, GT 60, GT and GT L
A Mounting Kit is required for the installation of handlebar end mirrors. This serves as a handlebar extension and is optionally available for mounting with or without Handlebar End Weights, item no. MV502950.
Fitting instructions for Vespa ET, LX, LXV and S
A handle with handlebar end opening is required for installation or the original handle must be opened accordingly.
SIP-TIP:
- The original mirror hole can be neatly closedwith a Covers .
MONTANA 2 Mirror Handlebar Ends: round, E-approved, lever length to end of clamp: 120 mm, Ø 102 mm, can be used on either the left or right side.
