CRC CRICK crack detection system 110-120-130 guarantees reliable visual inspection of damaged areas on weld seams, tanks, pipes, forklift trucks and Scooter Hoists. The quality-tested and non-destructive test system using the penetrant method in accordance with DIN EN ISO 3452 consists of three products: CRICK 110 Cleaner, CRICK 120 Red Penetrant and CRICK 130 Wet Developer with White Pigments.
Crick 110 Quick Cleaner for pre- and intermediate cleaning of surfaces during crack testing using the penetrant method
Crick 120 Red penetrant for non-destructive crack detection on metal and plastic surfaces
Crick 130 White Developer for non-destructive crack testing on metal and plastic surfaces
Properties:
- Penetrant method according to DIN 3452
- Non-destructive test system
- Universally applicable
Advantages:
- Reliable indication of cracks
- Surface is not damaged
- For metal, plastic, ceramic
Notes: The test system consists of 3 products: CRICK 110 for Cleaner, CRICK 120 as a color penetrant and CRICK 130 as a wet developer.
Signal word
Danger
Contains
2-Propanol; Isopropyl alcohol; Isopropanol; Acetone; Propan-2-one; Propanone
Hazard statements
H222 - Extremely flammable aerosol.
H229 - Pressurized container: May burst if heated.
H319 - Causes serious eye irritation.
H336 - May cause drowsiness or dizziness.
Precautionary statements
P102 - Keep out of the reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 - Do not spray on an open flame or other ignition source.
P251 - Do not pierce or burn, even after use.
P261 - Avoid breathing vapor/aerosol.
P271 - Use only outdoors or in a well-ventilated area.
P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C.
P501 - Dispose of contents/container to hazardous or special waste collection point in accordance with local, regional, national and/or international regulations.
Additional information
EUH066 - Repeated exposure may cause skin dryness or cracking.
