The POLINI SMARTMAP is a programmer for the original Control Unit for the Vespa Primavera and GTS/GTV, which enables precise, safe and fully reversible interventions in engine management.

With the POLINI SmartMap, a map tuning developed by POLINI is loaded directly onto the standard Control Unit without permanently changing the original vehicle electronics. The system does not require any additional Control Units to be installed, creates a backup of the original programming and can be configured via App for Apple, Android and Huawei devices.

• Direct programming of the original Control Unit
• Save original programming and restore it at any time
• Characteristic maps developed and tested by POLINI

The great strength of the POLINI SmartMap lies in its sophisticated concept. Instead of additional components or permanent conversions, the system works directly with the scooter's original Control Unit. This means that the original electronics are retained, while the engine management system can be specifically calibrated and adapted. A particularly practical feature is that the standard set-up is saved before any changes are made and can be restored at any time if required.

The available POLINI maps are assigned to specific scooter models and engine configurations. Among other things, open intake, exhaust system in standard or racing version and - if applicable - larger displacement are taken into account. The platform is constantly being expanded so that supported models and suitable maps can be continuously added. The compatibility table with the approved applications and notes always remains decisive.

In addition, the POLINI Variator always remains compatible and can be used both before and after the installation of the SmartMap, depending on the application. A special Wire Kit is required for connection to the vehicle's diagnostic port, which is available separately. It should also be noted that each SmartMap device is linked exclusively to the Frame and Engine of a single scooter.

Conclusion: The POLINI SmartMap is a clean and reversible solution for anyone who wants to use the original Control Unit professionally, model-related and without permanent additional hardware.