HIGHSIDER ROCKET LED Rear Light - suitable for installation or mounting - with black aluminum ring and tinted lens. E-approved for rear.

6 very bright SMD LEDs are installed in the center. The outer ring consists of COBs (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. This combination is supplied with a black anodized aluminium ring that fits over the base body.

Dimensions

A1: 18 mm

A2: 15 mm

D1: 45 mm

D2: 43 mm

Fixing bolt: M8 x 1.25 mm, length: 18 mm

Connections

Black Wire = Ground (-)

Yellow Wire = Rear Light (+)

Red Wire = Brake Light (+)

Scope of delivery: 1 piece

Please note

The combination can be installed flat without the aluminum ring so that only the lens is visible. A 40 mm wide hole must be drilled for this. Alternatively, the combination can be mounted with the aluminum ring on a holding plate on the vehicle, for example. Other Replacement Parts from the HIGHSIDER CLASSIC series Your bike - your project: Turn your classic bike into an individual highlight with the HIGHSIDER CLASSIC products - with classic round shapes to create an aesthetic style icon!