Holder for damage-free, one-time attachment of the highway vignette or sticker on single-lane motor vehicles.
Freeway vignette
Attachment location: On a clearly visible side of the vehicle on a component that is difficult to remove from the vehicle, e.g. fork bar or frame part. Mounting in other places such as Foot Pegs, open handlebar ends, crash frames, etc. is not permitted.
Special features: Cast in one piece and equipped with a one-way locking system. Not transferable, as the locking teeth face inwards. Can only be removed by destruction.
Assembly: Place the integrated assembly strap around a piece of rail that runs as vertically as possible and guide it through the Catch. Then lash it tight as far as it will go, lock it with a Tool (e.g. Screwdriver) and allow it to snap into place. After final positioning, pinch off the excess length with a sharp tool (e.g. pliers). Watch the installation video: www.fixiteasy.at
Disassembly: Cut off the Holder at the pivot point using a sharp tool.
Note on use: Only attach the self-adhesive sticker to a grease-free and dust-free surface.
§ 57a Sticker holder (Austria)
In Austria, the law states that stickers may not be stuck on top of each other. This means that the old sticker has to be removed every year, which often damages the Paint. With this Holder, the Badge can be easily cut off, replaced and reattached.
Area of application: For single-track vehicles for damage-free mounting/removal of Badges on spar pieces up to a maximum diameter of 8 cm.
Material/color/adhesive surface: Plastic / black / 5.4 cm × 8.9 cm (pennant shape).
Properties: Molded in one piece, one-way closure, non-transferable.
attachment location: In accordance with the Motor Vehicle Act 1967, the Badge must be attached to the vehicle in such a way that the year and month of the next inspection are clearly visible through the hole marking. In addition, the Badge must be attached to the outside of the vehicle in such a way that its lowest point is no less than 40 cm and its highest point no more than 190 cm above the road surface. This means: on the Fork or steering bar on the front right only. In addition: only on a component that cannot be easily removed with tools - i.e. not on crash bars, Foot Pegs, Luggage Carriers, easily unscrewable covers or open handlebar ends.
