If you weren't born with three hands, you may find it difficult to 1) tighten the Vespa Cable, 2) hold the nipple and 3) tighten the clamping screw at the same time.
Our tool makes the usually "fiddly" installation of screw nipples on classic Vespa scooters much easier.
- Two tools in one
- Bracket and tighten at the same time
- Simplifies the installation of screw nipples
Inside the Tool, an 8 mm ring wrench and a 7 mm Socket wrench are arranged one above the other. The 8 mm wrench is held via the Handle and locks the Cable Nipple on the outside, while the 7 mm socket tightens the clamping screw via the toggle or a ratchet.
With a little practice, the Cable Nipples can be fixed with one hand. This allows the second hand to be free to tighten the Cable at the same time.
Cable Nipples for gears and Clutch can be easily tightened and loosened. The Cable receives the correct, necessary pretension with 1 assembly process. When tightening, the nipple does not rotate so that the cables are not kinked but remain smooth-running.
A great relief, especially on smallframe Vespas, where the Cable Nipples have to be tightened overhead and there is almost no space available for the many tools required at the same time.
Conclusion: A tool that should be in every classic Vespa Screwdriver's toolbox.
