Shock absorber‘s are the central chassis element. The shock absorber has a major effect on the driving characteristics of your scooter through it‘s spiral tension and graduated buffering. The rule of thumb goes: the stiffer it‘s construction and more exact it‘s adjustment, the better your traction and at the same time, better handling.

There‘s no doubt about it, MALOSSI plays the shock absorber game in another league than their competition. Whoever wants absolute racing quality shock absorbers, simply can‘t overlook the „RS24“.

„RS 24“: High end gas pressure shock absorber with nitrogen gas buffer, adjustable spring pre-load, pressure and tension adjustable through knurled screw. Progressive characteristics, good handling.

SHOCK ABSORBER RS24

It is a regenerable oleo gear with bi-lamination piston and baffle plate compensation.

• ø 36-mm piston with two independent lamellar packs, one in extension and one in compression; lamellar system made of harmonic steel with leaf spring configuration;
• LUBRIFLON-PTFE B70 piston runner guide (bronze-loaded modified compound);
• Sliding on GUIDA DU guide bushing (a composite material obtained by sintering a layer of spheroidal bronze on a mild steel strap properly treated, followed by impregnation and coating with a mixture of PTFE + PB);
• Polyester resin SEALTHANE grade 9345 scraper ring
• 38NCD4 alloy steel shock absorber rod ø 14 mm, hardened and tempered with hard chrome deposit thickness 25/30 microns (superficial hardness of the untreated shaft HRC 55/60)