The threadlocker from Liqui Moly prevents Screws from loosening unintentionally and is particularly resistant to vibration loosening.
It has a wide temperature range from -60 °C to +150 °C and hardens quickly and reliably. It can also be used on oiled surfaces .
Thread Locker seals screw connections, prevents leaks and offers good resistance to chemicals.
Suitable for all common nut and bolt sizes in all grades.
Highlights
- resistant to loads and vibrations
- Can be used on oiled surfaces
- Good adhesion to vertical surfaces
- Prevents leaks
- Cures in the absence of oxygen (anaerobic)
- Good chemical resistance to petrol, Oil, water/glycol, Brake Fluid
Application
Apply the product evenly to Screws or Nuts. Curing takes place in the absence of air (anaerobic).
Please note that the curing time varies depending on the material: For active materials such as iron, steel, copper, brass and bronze, curing is fast as these metals have a high iron or copper content.
With passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics, curing is slower.
Important notes
To avoid premature curing of the Clue, sufficient air must always remain in the bottle. The bottle should therefore only be about one third full. However, the specified filling quantity corresponds to the total contents of the container.
Safety instructions
EUH208 Contains diisopropylbenzene hydroperoxide. May cause allergic reactions.
EUH210 Safety data sheet available on request.
