Crystal-clear protective wax from FERTAN for aluminum, chrome, stainless steel, brass, copper and painted surfaces. UV-resistant, water-repellent and non-sticky after curing.

FERTAN Protewax BP 527 is a polyacrylic wax and serves as a temporary, resistant and crystal-clear protection against moisture and corrosion. It is suitable for painted surfaces, painted vehicle underbodies, aluminium, chrome and galvanized surfaces. The protective layer hardens quickly, remains crystal clear and is UV-resistant.

Application: Thoroughly clean the parts or surfaces to be coated. Protewax BP 527 does not Clue after curing and remains crystal clear. To degrease, use a special cleaner or remove the coating with a high-pressure cleaner.

Note: Container is under pressure. Protect from sunlight and temperatures above 50 °C. Do not drill into or burn the can, even after use. Do not spray into flames or onto glowing objects.

Signal word

Danger

Hazard statements

H222 Extremely flammable aerosol.

H229 Pressurized container: May burst if heated.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

Precautionary statements

P102 Keep out of the reach of children.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P211 Do not spray on an open flame or other ignition source.

P251 Do not pierce or burn, even after use.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

P410+P412 Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.

For further information, see safety data sheet in the download area.