You are here:
WebshopVespa Smal...TuningHigh End R...Input Shaft Assembly 19-17-14
 Your Shopping Cart
Your shopping cart is empty.
calculate shipping Live! Shipping Costs Calculation
 Your Notepads
notepad icon  Please login to use the Notepads.
webshop icon All Webshop
Your Scooter
Show only articles for selected scooter.
Most Popular Articles

SIP EuroFlat Banner
Error Unfortunately, the selected article is out of production.
prev Pictures may look differentnext

Input Shaft Assembly 19-17-14

-10 teeth, 4-speed/PK, DRT
SINCRO REPLICA "ultra short
4th gear/short 3rd gear",
for Vespa 50 S 2°/Special V5B3
-4T/SR/SS/90 R/SS/100 2°/125
for 4th gear, 47 teeth PARMA

Clean gear changes while you are accelerating can be decisive over defeat or victory. It is almost an art to be able to setup your gear ratios ideally to match the area of your rev range where maximum power is available (the power band). The VESPA gear box components have seen a lot of experimentation and development in recent years. DRT are at the forefront of this research and have suitable gear box parts available to suit most possible motor setups.

The problem of a clean gear change between 3rd and 4th gears, especially with performance enhanced motors, is shared between both the large and small frame VESPA motors. DRT offers new gear ratio setups with their range of input shaft assemblies. Maximum engine revolutions in 4th gear with a 150 kg load over a longer distance or race use of the 4th gear, everything is possible.


DRT input shaft assemblies are made of a tougher than standard grade of steel and then hardened through tempering. They are therefore extremely durable and so offer an ideal extension to the vast range of existing gear box components available. The gear ratios are much easier to adjust to the particular motor characteristics required. Most of the input shaft assemblies are equipped with a fine M11 grade thread and the nut to fit is also included.


Conclusion: These DRT input shaft assemblies are essential for all serious racers and sprinters. Rally going scooterists have also learnt the benefits of top quality adjustable gear box ratios.


SIP-TIP: If you want to raise the ratio of your gear box start with the primary drive gears. The input shaft upgrade is first, followed by the adjustment of the individual gear cogs on the output shaft. Never forget to order a new gear selector cruciform (at best the DRT item) and fresh gear box oil. Last but not least the SIP gear box shaft assembly spacers help you find the ideal output shaft assembly end float for safe and enduring use of your motor.


You can choose from the following DRT input shaft assemblies:

SINCRO/SINCRO REPLICA/NURBURG/MATRIX input shaft assemblies: THE racing gear box components. A shorter 3rd and 4th gear but is only possible in combination with the PARMA cog with 47 teeth, which allows even finer gear ratio tuning to the rest of the gear box. The SYNCRO PISTA version also has a shorter 2nd gear. It is advisable to begin with the NURBURG gear cog an then to progressively shorten the individual ratios according to the power characteristics of your motor. The NURBURG/ SINCRO/ MATRIX input shaft assemblies all require the PARMA cog with 47 teeth.

The SINCRO REPLICA and NURBURG input shafts shorten the 4th gear ratio even more than the RUNNER version. The 3rd gear ratio is also shorter. The ROVIGO 1st gear cog with 55 teeth and the 2nd gear cog with 55 teeth, both produced by DRT, have proved very successful in combination with these shaft assemblies.

The SINCRO PISTA shaft assembly has also a shorter 2nd gear ratio. These input shaft assemblies with 19, 17, 13 and 10 cog teeth respectively are conceived for use on the race track. In performance orientated motor projects the use of the output shaft gear cogs, produced by DRT, with 54 and 51 teeth for the 1st and 2nd gears and a cog with either 49 or 50 teeth on the 3rd gear cog has proved successful.


Currently the MATRIX input shaft assembly conversion kit rules the roost of race series gear box tuning. Denis Innocente: "It won in all classes and races, where it was used in 2011". A rider with a scooter equipped with a PARMA kit performance racing cylinder combined with a 19mm carb rode over the finish line with an end-speed of 140 km/h (88 mph). In high end motor tuning projects this input shaft has proved best in combination with the output shaft gear cogs with a PARMA 4th gear, a 1st gear with either 55 or 54 teeth, 51 teeth on the 2nd gear cog and the 3rd gear cog with either 49 teeth, also produced by DRT, or the OE PIAGGIO item for the 3rd gear with 50 teeth.

The above listed gear ratio combinations are of course only recommendations for use on kart tracks, smaller race track circuits and street use. For larger circuits such as Cadwell park or the Nürburgring in Germany a taller gear ratio setup is necessary.

Conclusion: If you race or intend to you will not be able to do without these gear box conversion kits.

OEM Numbers (for the purpose of comparison)  INT CLust Ssincro 245.17-19/CP (DRT)

Customers also searched for this article with:  Input Shaft Cog Wheel Set

40431770 $113.00
88510000 $1.29
40431710 $113.99
Our Alternatives
for this item
40442400 $137.78
40442173 $236.89
4043275A $117.95
4044285K $207.16
4043185F $127.86
Customers choice
might interest you...
40431770 $113.00
40431730 $113.99
40431710 $113.99
40431630 $113.00
High End Racing Parts

This item is in stock in sufficient quantity.

328g / piece
Stock on hand   Amount


Pages(s) 462 468 to open.
Catalog Preview Page
Product forums
Spare Parts
icon scootermodels This product fits the following models
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
VESPA 50 S 50 V5SA1T 2T AC `63-`84 15325 - > 22444
VESPA 50 Special 50 V5B3T 2T AC `75-`83
VESPA 50 Special Elestart 50 V5B4T 2T AC '75-'76
VESPA 50 SR / Sprinter 50 V5SS2T 2T AC `71-`79
VESPA 50 SS / Super Sprint 50 V5SS1T 2T AC `65-`71
VESPA 90 Racer 90 V9SS2T 2T AC `71-`74
VESPA 90 SS Super Sprint 90 V9SS1T 2T AC `65-`71
VESPA 100 (UK) / 100 Sport (US) 100 V9B1T 2T AC `78-`90 50001 ->
VESPA 125 125 VMA1T 2T AC `65-`67
VESPA 125 Primavera 125 VMA2T 2T AC `67-`83
VESPA 125 Primavera ET3 125 VMB1T 2T AC `76-`90
VESPA PK 50 50 V5X1T 2T AC `82-`84
VESPA PK 50 S / Elestart 50 V5X2T 2T AC `82-`84
VESPA PK 50 S Lusso / Elestart 50 V5X2T 2T AC `85-`88
VESPA PK 50 XL / Elestart 50 V5X3T 2T AC `85-`90
VESPA PK 50 XL2 / Elestart 50 V5X3T 2T AC `90-
VESPA PK 80 S / Elestart 80 V8X5T 2T AC `82-`86
VESPA PK 80 S Lusso / Elestart 80 V8X5T 2T AC `85-`88
VESPA PK100 S / Elestart 100 V9X1T 2T AC `82-`84 4gear
VESPA PK125 125 VMX1T 2T AC `82-`85
VESPA PK125 ETS / Elestart 125 VMS1T 2T AC `84-`85
VESPA PK125 S / Elestart 125 VMX5T 2T AC `82-`84
VESPA PK125 XL / Elestart 125 VMX6T 2T AC `86-`90
VESPA PK125 XL2 125 VMX6T 2T AC `90-

Legend: Quantity In Stock

This article is in stock and ready to be shipped immediately. Our warehouse is fully stocked.
This article is in stock. This item is in stock in sufficient quantity.
This article will soon be sold out. This item will be sold out soon.
This item is ordered by us especially for you. Deliverytime might take more than 3 weeks. You cannot cancel this order any more. This item needs to be ordered especially for you. The expected delivery time is about 3 weeks.
This article is currently not available but will be back in stock soon. This item is currently not available but will be back in stock soon.
This article is currently not available. This item is currently not available. You can order it nevertheless. The expected delivery time is about 3 weeks.