You are here:
WebshopVespa PX/T...TuningRacing Cyl...Racing Cylinder D.R. 177cc
 Your Shopping Cart
Your shopping cart is empty.
calculate shipping Live! Shipping Costs Calculation
 Your Notepads
notepad icon  Please login to use the Notepads.
webshop icon All Webshop
Your Scooter
Show only articles for selected scooter.
Most Popular Articles

prev Pictures may look differentnext

Racing Cylinder D.R. 177cc

by SIP for Vespa P80X/PX80 E
Ø 63,0mm, cast iron, 7 ports,
stroke 57mm,
with cylinder head,
cylinder base turned for PX80


The big brother of the 135er is a cylinder with power reserves for problem free daily usage. Other than the small DR, the 177 definitely gets performance in higher rev ranges due to it's two auxiliary exhaust ports. This makes it a dependable companion through it's relative low compression. When the 3rd cylinder transfer port is blown (gasket), the DR can be also be driven on engines with 2 transfer ports. It also gets a respectable performance increase. With using the POLINI head and adapting the cylinder transfer port to POLINI 177 dimensions, the 177 gets more power, but won't be completely indestructible.

The OLYMPIA 177 is identical to the DR 177er, and is a very good alternative if the DR if not available.

Conclusion: a top all round cylinder with great long distance qualities.


Cast Iron/ 63mm Bore/ 7 Transfers/ 177.68ccm

Cast iron cylinder, 57mm stroke, 7 transfers, pistons with 2 piston rings, exhaust with additional auxilliary outlets, original DR cylinder head and gasket set included in delivery. The crankcase will not need modification in the first step, jets and ignition should be checked and optimized. Models with elestart will need modification of lower cooling fins.


SIP-TIPP: Adjust jets and replace spark plugs(W4AC), both an absolute must, ignition setting circa 19°, Harmonizes well with 24/24 Si, Italian racing exhausts/SIP ROAD, longer transmission and racing crankshaft are recommended. 28er carb and SIP / JL Racing exhausts are the DR's innermost desire!


SIP-Kunde Massimo M., Schweiz:

“Very good kit for simple tuning. Good torque. With 24/24 SI and standard gearing about 125 km/h possible.”

Cylinder Kit modified for PX80: We've modified this cylinder kit to fit the smaller casing diameter of the 80er. The original 80ccm crankshaft with 48mm stroke must be replaced with a 125/150ccm shaft from the larger models with 57mm stroke. We also recommend a longer transmission (POLINI/MALOSSI) or a clutch cog with 21-22 teeth.

Customers also searched for this article with:  race cylinder, performance cylinder, race cilinder, tuning cylinder

icon explos Spare Parts Catalogue
This article can be found in the following exploded drawings ... go Go to Exploded Drawings!
24166200 $127.36
24166400 $176.73
Our Alternatives
for this item
10000000 $176.73
19874700 $229.06
10080000 $453.17
10060000 $229.06
Customers choice
might interest you...
Racing Cylinders

This item is in stock in sufficient quantity.

4,800g / piece
Stock on hand   Amount


Pages(s) 87 128 to open.
Catalog Preview Page
Product forums
Spare Parts
icon scootermodels This product fits the following models
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
VESPA P80 / P80 E (Frankreich) 80 V8A1T 2T AC `80-`84 crankshaft with 57mm necessary
VESPA P80X/PX80 E 80 V8X1T 2T AC `81-`83 crankshaft with 57mm necessary
VESPA PX 80 E Lusso/ EFL/ Arcobaleno / Elestart 80 V8X1T 2T AC `83-`90 crankshaft with 57mm necessary
VESPA PX100 E 100 VIX1T 2T AC `83-`84 crankshaft with 57mm necessary

Legend: Quantity In Stock

This article is in stock and ready to be shipped immediately. Our warehouse is fully stocked.
This article is in stock. This item is in stock in sufficient quantity.
This article will soon be sold out. This item will be sold out soon.
This item is ordered by us especially for you. Deliverytime might take more than 3 weeks. You cannot cancel this order any more. This item needs to be ordered especially for you. The expected delivery time is about 3 weeks.
This article is currently not available but will be back in stock soon. This item is currently not available but will be back in stock soon.
This article is currently not available. This item is currently not available. You can order it nevertheless. The expected delivery time is about 3 weeks.