You are here:
WebshopVespa PX/T...TuningHigh End R...Gearbox 23/64 teeth, MALOSSI
 Your Shopping Cart
Your shopping cart is empty.
calculate shipping Live! Shipping Costs Calculation
 Your Notepads
notepad icon  Please login to use the Notepads.
webshop icon All Webshop
Your Scooter
Show only articles for selected scooter.
Most Popular Articles

prev Pictures may look differentnext

Gearbox 23/64 teeth, MALOSSI

for Vespa 180-200 Rally/P200E
/PX200 E/Lusso bis `94/Cosa
1 125-200/T5
straight teeth, Ø 108 mm

Primary drive gears can rise or lower the final drive ratio of your VESPA motors gearbox. A higher drive ratio becomes necessary when increasing the cubic capacity of your PX80-150 motor with performance enhancing cylinder kits with a cubic capacity of between 166 and 177cc. A performance enhanced 200cc VESPA motor with a tuning cylinder or at least an expansion chamber exhaust system could also benefit from a taller primary drive gear ratio. The extra performance available ensures that in combination with a taller gear ratio the higher revolutions can be turned into a noticeable top-speed increase. More torque orientated motor setups have then the advantage of a higher cruising speed at lower engine revs., with more miles to the gallon and less risk of overheating and the inevitable motor damage that follows.


The primary drive ratio conversion kits consist of a primary drive gear, spring repair set (apart from the DRT version) and a clutch cog. The gear cogs in this conversion kit are of the straight cut type. This makes them more mechanically efficient than helical or angled primary drive gear cogs. The axial thrust created by the original PIAGGIO gear cogs against the input shaft bearing is also avoided. A higher ratio primary drive makes all the gears taller simultaneously. If you do not want to strip your motor completely for a similar effect, you can replace the clutch gear cog, on its own. If only individual gears need ratio adjustment these too can be replaced with correspondingly larger or smaller cogs.


After a long period of abstinence both MALOSSI and POLINI have their classic primary drive conversion kits back in production. The 24/63 ratio in the MALOSSI kit offers very tall gearing. Due to the fact that MALOSSI 210cc cylindered motors have enough top end power to enable speeds of up to 135 km/h (over 80 mph) to be achieved, without having to use the infamous white van man as a wind-breaker on the motorway. DRT also have a specialised solution in production: The 23/62 gear cog teeth ratio is designed for the premier division of cylinder kits, beyond 210cc. The 24/62 kit is designed for GS 150 motor projects with performance enhancing peripherals such as an expansion chamber exhaust system or even a QUATTRINI M1XL racing cylinder, to enable a higher top-speed.


If these kits are intended to be used in combination with a PIAGGIO COSA II clutch then the corresponding DRT clutch cog will also have to be ordered. Alternatively Worb5 produce a primary drive gear cog kit specifically for use with the PIAGGIO COSA II clutch. Or use the special MALOSSI Cosa 2 primary drive gear in 23/64 or 24/63.


Conclusion: There is hardly a more effective method to provide the correct gearing for your motors specific power output.


SIP-TIP: Always install and replace ALL of the smaller primary drive components during each major service. The securing plates on both sides of the primary drive, input shaft holding nut, tab washer and also the input shaft needle bearings should all be replaced for save and enduring use of your motor. Last but not least do not forget to order fresh gearbox oil, gaskets and all relevant oil seals! If you want to mount a 200cc VESPA motors clutch in your PX80-150cc crank case then you will also need the primary drive from the 200cc motor.


SIP Community user ‚Mick‘ on art.-no. 20301000: „Spot on. Assembled easily.”


SIP Community user ‚Vespisti1‘ on art.-no. 20302000: “I'd not try this unless you fit a Pinasco or Polini 177, with a Sito Plus and a 24/24 SI carb. Benefits: You can save fuel when cruising with ease in 4th gear (a lot of it), and at the same time have an unstopable screaming tractor in 3rd gear capabable of climbing a hill, on a windy morning, with a tall screen and two up at 100 km/h”

OEM Numbers (for the purpose of comparison)  67 3888 (MALOSSI)

Customers also searched for this article with:  gear box cogs, gear kit, transmission, primary transmission, gear box, gearbox cogs, upgearkit, gear ratio, up gear kit, gear up kit, Gearing, upgear kit

16305000 1,40 €

incl. VAT  plus shipping.
58560000 1,40 €

incl. VAT  plus shipping.
16020600 32,00 €

incl. VAT  plus shipping.
90081000 9,90 €
(0,47 €/Stck)
incl. VAT  plus shipping.
13082700 42,00 €

incl. VAT  plus shipping.
Our Alternatives
for this item
20301000 149,00 €

incl. VAT  plus shipping.
16020210 159,00 €

incl. VAT  plus shipping.
16020200 149,00 €

incl. VAT  plus shipping.
20200010 139,00 €

incl. VAT  plus shipping.
16020300 155,00 €

incl. VAT  plus shipping.
Customers choice
might interest you...
20020190 140,00 €

incl. VAT  plus shipping.
81015000 69,00 €

incl. VAT  plus shipping.
20301000 149,00 €

incl. VAT  plus shipping.
15878000 17,90 €

incl. VAT  plus shipping.
40030000 97,00 €

incl. VAT  plus shipping.
High End Racing Parts

149,00 €
This item is in stock in sufficient quantity.

incl. VAT
plus shipping
Du kannst diesen Artikel auch finanzieren
Informationen zu möglichen Raten

838g / piece
Stock on hand   Amount
Free shipping

Pages(s) 483 424 to open.
Catalog Preview Page
Product forums
Spare Parts
icon scootermodels This product fits the following models
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
VESPA 180 Rally 180 VSD1T 2T AC `68-`73
VESPA 200 Rally 200 VSE1T 2T AC `72-`79
VESPA COSA 1 150 VLR1T 2T AC `87-`90
VESPA COSA 1 200 VSR1T 2T AC `88-`91
VESPA COSA 1 125 VNR1T 2T AC `88-`91
VESPA P200E / PX200 E 200 VSX1T 2T AC `77-`83
VESPA PX200 E Lusso/ EFL/ Arcobaleno / Elestart 200 VSX1T 2T AC `83-`97 till 1994
VESPA T5 / Elestart 125 VNX5T 2T AC `85-`90
VESPA T5 Classic 125 VNX5T 2T AC `92-`95,00

Legend: Quantity In Stock

This article is in stock and ready to be shipped immediately. Our warehouse is fully stocked.
This article is in stock. This item is in stock in sufficient quantity.
This article will soon be sold out. This item will be sold out soon.
This item is ordered by us especially for you. Deliverytime might take more than 3 weeks. You cannot cancel this order any more. This item needs to be ordered especially for you. The expected delivery time is about 3 weeks.
This article is currently not available but will be back in stock soon. This item is currently not available but will be back in stock soon.
This article is currently not available. This item is currently not available. You can order it nevertheless. The expected delivery time is about 3 weeks.