Wheel Hub Paste LIQUI MOLY 4058

Release paste for centering rings on aluminum rims, joints between rims and Wheel Hubs, for plug and screw connections as well as for repair and maintenance work on brake systems.

The LIQUI MOLY Wheel Hub Paste is a synthetic, metal-free release paste that was primarily developed to prevent the Rim from welding or rusting onto the Wheel Hub.

When used correctly, its excellent adhesion prevents skidding even at high speeds.

The product can also be used to lubricate screw connections or for repair and maintenance work on brake systems.

Temperature application range: -40°C to +1,400°C.

• excellent adhesion
• eliminates squeaking
• excellent temperature resistance
• excellent Corrosion Protection
• easy to apply
• optimum release effect
• resistant to road salt and splash water

Application

First remove coarse soiling, oxidation layers or rust on the contact surfaces, joints or threads with a wire brush Wire Brushor with the help of an emery cloth.

Then clean parts with Quick Cleaneror Brake Cleanercleaner. After the solvent has evaporated, apply a thin layer of Wheel Hub Paste to the cleaned areas.

Note: Do not apply Wheel Hub Paste to the friction surface of the Brake Pads or Brake Discs!

Signal word

Danger

Hazard warnings

H222-Extremely flammable aerosol.

H229-Canister is pressurized: May burst if heated.

H315-Causes skin irritation.

H318-Causes serious eye damage.

Precautionary statements

P101-If medical advice is needed, have product container or label at hand.

P102-Keep out of reach of children.

P210-Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P211-Do not spray on an open flame or other ignition source.

P251-Do not pierce or burn, even after use.

P280- Wear protective gloves / eye protection / face protection.

P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

P310-Call a POISON CENTER/doctor immediately.

P410+P412Protect from sunlight and do not expose to temperatures exceeding 50 °C.

Additional information

EUH211-Attention! Spraying may produce hazardous respirable droplets.

Do not inhale aerosol or mist.

Formation of explosive mixtures possible without adequate ventilation.

Calcium dihydroxide