Tuningbox E-Bike BADASS Box 4

The latest and most advanced E-bike tuning technology, produced by Badass ebike tuning, for BAFANG pedal-crank mounted motors. A new slimmer housing with a patented QR fixing mechanism, enabling more rapid installation and/or removal of the module. The design has also been toughened up, using a special sealing compound from the automotive industry. The circuit board has also been revised and improved, with a greater range now enabled by a single AAA battery.

The badassBox 4 BAFANG has wireless information transmission, there is no need to alter or modify the electronics or software on the E-bikes motor. An incorrect speed is suggested by the module, to ensure continued power delivery from the motor. It is not necessary to open the motor and it will not be damaged or altered in any way. With all the advantages we here at SIP appreciate, in principle, a false lower speed and all the associated information, is then indicated.

• Wireless E-bike tuning.
• Single AAA battery enables 7000km travel before replacement.
• Made in Germany.

The badassBox 4 BAFANG is the result of a lot of development work and works differently to the other badassBoxes due to its concept. The badassBox BAFANG is mounted on the chain stay with cable ties and the speed sensor of the e-bike is unscrewed and placed on the box. The badassBox 4 BAFANG was tested with the M500 and M800.

The communication range has been increased, the new AAA battery (instead of a CR2 type) only needs replacement every 7000km and can be easily exchanged without the need for tools. The improved range has been achieved with the development of their patented signal booster, the Field Enhancement & Elimination Technology (FEET). As they are mounted in the direct vicinity of the E-bikes wheel, they also require the ultimate protection against moisture and vibration in the form of a special sealing compound poured into the housing in the final stage of production. The badassBox 4 was designed, developed and is produced exclusively by Badass ebike tuning. Every module is tested for full-functionality before and after the sealing compound is applied.

Mounting

The badassBox BAFANG is mounted on the chain stay using cable ties and the speed sensor of the e-bike is unscrewed and placed on the box. During initial installation, the supplied spoke magnet must be fitted instead of the original magnet. Our spoke magnet works without the badassBox identically to the original magnet , but is necessary for the function with our patented field amplification when the badassBox is mounted. After placing the sensor on the badassBox, the spoke magnet must be moved towards the edge of the housing in the direction of the snap lock. If the spoke magnet touches the badassBox, the spoke magnet must be placed as close as possible to the badassBox and turned by 90 degrees.

Important

The badassBox 4 is only compatible with E-bikes fitted with pedal-assistance motors between the pedals, in the middle of the bike and originally limited to 25kph with 250W constant performance. Other types, such as those with pedal-assistance up to 45kph or wheel axle mounted motors are not supported by this tuning device.

Software

All Firmware updates should be avoided. Although sometimes tempting the customer with more efficient battery management and other 'advantages', they also inevitably include features that prevent any kind of derestriction measures. To retain the choice between having the bike derestricted or in an original state, as with the badassBox 4, never update the motor software! This is especially relevant if the e-bike is being serviced/repaired in a regular e-bike workshop!

Conclusion: If you prefer ease of mounting and also a traceless removal in a matter of seconds, you will greatly appreciate the advantages the badassBox 4 provides!

Useful tools for the e-bike/pedelec - SIP-TIP:

• The spoke magnet with wing screw is suitable for all e-bikes.
• Wing screw for all standard magnets from Bosch, Brose, Conti and Kalkhoff.
• Universal adapter for all e-bikes/pedelecs