Tuning Chip E-Bike SPEEDBOX 3.0
for E-Bikes/Pedelecs with Engine BROSE Drive T/ Drive S/ Drive S Mag/SPECIALIZED
Show all matching vehicle models- Assembly: invisible at the drive motor
- displayed: actual values
- activation: WALK key / + - + -
- controls: keys
- electric assistance - 99 km/h
- Max. Speed: unlimited
Race use only! Liability, warranty and guarantee on the part of the dealer/manufacturer expires or is severely restricted.
Product description
The tuning module SpeedBox 3.0 for BROSE Drive T/ Drive S/ Drive S Mag/SPECIALIZED drives removes the 25 km/h speed limit from E-Bikes and Pedelecs.
With the tuning module SpeedBox 3.0 for BROSE you can freely adjust the speed limiter of the E-Bike beyond 25 km/h. After installation, the display will show correct data such as maximum speed, average speed, daily distance, and range.
- Display of real values
- Invisibly installed on the engine
- Maximum speed freely adjustable
Setting the tuning module SpeedBox 3.0 for BROSE Drive T/ Drive S/ Drive S Mag/SPECIALIZED drives
To activate the SpeedBox 3.0, press the Walk function on the e-bike controller. After activating, the display will briefly show 9.9 km/h. Then you can ride at unlimited speeds like 40, 50 and even more than 60 km/h. To deactivate the tuning function, activate the WALK function again. This will cause the display to show 2.5 km/h and the speed limit of 25 km/h is reactivated. Your pedelec will then function as it did before the SpeedBox was installed.
If your e-bike does not have a classic control panel with walk function, then use the key combination + - + - instead to activate and deactivate the SpeedBox.
To change the top speed, first switch the mode three levels down and then three levels up again. In this order: TURBO - TRAIL - ECO - OFF - ECO - TRAIL - TURBO. The resulting speed is displayed. Alternatively, you can use the WALK function or turn the rear wheel 360 °. 1.5 km/h corresponds to a maximum speed of 15 km/h, 2.0 corresponds to a maximum speed of 20 km/h and so on until 9.9 km/h, which corresponds to a maximum speed of 99 km/h. The last value displayed is saved after five seconds of inactivity.
Assembly and disassembly
To connect the SpeedBox 3.0 for BROSE to an e-bike, use the color plugs equipped with a key for the correct connection, so installing the chip is really easy. After the battery is removed, the connections on the engine are exposed. Remove all connections from the engine to the sensor and to the display, then close the SpeedBox 3.0 for BROSE in between. Just follow the colors and nothing can go wrong.
Note: If the tuning module is installed on a brand-new E-Bike, you should have ridden the bike at least one kilometer before.
It is recommended not to update the software of the e-bike. This may affect the function of the Speedbox.
Conclusion: With the tuning module SpeedBox 3.0 for BROSE nothing stands in the way of a brisk ride beyond 25 km/h.
Our ideas for easy installation and a pleasant ride - SIP Tip:
- Allen Wrenches 3 & 6 mm or set of socket spanners
- Lightweight backpacks and bags offer plenty of space
- The cell phone holder is incredibly practical
ATTENTION: To avoid mistakes during installation, please read the product descriptions and Instruction Manuals that are available for your Tuning Chip. You can find additional information in this blog: E-bike tuning and software updates.
Customers also searched for this product with:
Product videos
Product fits
