Product description
A Silicone Remover is not only ideal for preparing a new paint job on a vehicle, but also when an existing Paint needs to be refreshed and cleaned.
Silicone is a commonly used additive in Clues, waxes, resins and other materials. Moreover, silicones are either invisible or very difficult to detect. Silicone often acts as a barrier for the subsequent product. Cleaning is therefore essential before using water-based materials or paints. We recommend the FERTANSilicone Remover.
How to use
Apply FERTAN Silicone Remover to a clean cloth and clean the surface thoroughly, then rub with a new clean cloth until dry. Do not touch or handle the surface with bare hands.
Suitable for: Steel, stainless steel, aluminium, brass, zinc and galvanized surfaces, polyethylene, PTFE, NBR, polyurethane, etc.
Not suitable for: EPDM, silicone rubber, CNBR and polystyrene.
Signal word:
Caution
Hazard statements
H319 Causes serious eye irritation.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P264 Wash hands thoroughly after handling.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
Special labeling of certain mixtures
EUH208 Contains orange oil, orange, sweet, ext. (CITRUS AURANTIUM DULCIS FRUIT EXTRACT). May cause an allergic reaction.