Screw timing indicator SIP digital M2,5x10 mm

A correctly set up ignition timing is essential for any tuned motor. This factor often separates the wheat from the chaff. The timing indicator SIP digital is a very practical tool that no well-equipped workshop should be without. The exact timing indicator SIP digital allows an optimal set up of the motors point of ignition. It can be used on both two and four stroke motors, no matter whether from a vintage Vespa or Lambretta, or 50-180cc two and four stroke automatic scooters.

To facilitate a simple and exact positioning of the timing degree indicator our SIP 2.0 timing degree disc is provided with three holes to accept the long fixing bolts (#83002410). This allows all regular degree discs to be mounted by simply drilling three holes in the battery compartment, making reading the timings even simpler.

Conclusion: A must-have tool, for all dedicated grease monkeys!

SIP - TIP: Do not forget to order a new spark plug. A strobe lamp is also necessary, along with a set of fixing bolts (#83002410). You need 2 x AAA Type Batterys.

Directions for use:

• Find the top dead centre (TDC)
• Mark the position shown by the indicator on the cooling fins
• Set the timing indicator to zero
• Desired ignition point (anti-clockwise) should then also be marked on the engine casings (for example 18° before TDC for the MALOSSI 211cc cylinder)
• Remove the timing indicator, start the engine and check with the strobe lamp if the arrow lines up with the marking on the casings. If not, rotate the stator plate without forgetting to mark its original position for future reference when rebuilding