Select scooter type
Select manufacturer
Select model

Product image for 'Jet SI DELL'ORTO 111Title'
Jet SI DELL'ORTO 111
Part no.: 40261110
€5.40
Including VAT Plus shipping
1g / Piece
Product link copied to the clipboard
Product image for 'Jet SI DELL'ORTO 111Title' Images may differ from the original
Product image for 'Jet SI DELL'ORTO 111Title' Images may differ from the original
Product image for 'Jet SI DELL'ORTO 111Title'
Product image for 'Jet SI DELL'ORTO 111Title'

Jet SI DELL'ORTO 111

for SI 20.15-17 A-D/​20.20-26.26E/​G/​H/​27.23
  • (main jet)
 
€5.40
210 ratings
Including VAT Plus shipping
1g / Piece

Product description

In the SI carburettor, the main jet is located in the jet block under the mixer tube and main air correction jet. It is responsible for making a certain amount of petrol available for premixing. With all tuning measures, no matter how small, it is necessary for the main jets to be raised, as they mainly impact on the middle and upper rev range. Their effect is linked very closely with the other components of the middle SI jet block and for comprehensive tuning, it is necessary for all of the components involved to be adjusted accordingly.

In recent times DELLORTO have regrettably been unable to deliver some of the more important jet sizes for their carburettors. The quality of certain after-market reproduction jets is unacceptable for us at SIP. For these reasons we have teamed up with the people at KOSO to have our own jets produced, complete with the SIP logo!

While the sizes of the DELLORTO jets can vary up to +/- 0.05mm from the given value, the SIP jets are much more precisely produced with their sizes only varying by +/- 0.005mm.

Those who've tuned carburettors and found the actual jet size does not correspond to the number engraved on the side, know what we're talking about. If 105 is written on it, then there'd better be 105 in it! Anything else is a cheap trick.

The size of the jets increases on the basis of one, two and three stages. The jets get increasingly richer. Simply attach the corresponding size to part no 4026.

The SI 105-128 and 130-140 jetting kits each contain 5 and/or 10 jets and are an ideal basic programme for any tuner.

 

Unfortunately, DellOrto does not follow a consistent system when naming its jets. Actually, it can be assumed that the number by which the single nozzle is named indicates the diameter of the hole in 1 / 100mm. This means that e.g. a 107 jet has a bore of 1.07mm. On the DellOrto main jets for the SI carburetor that is only partially true. Up to a size of 120, the bore diameter corresponds to the jet designation. From 120, the actual diameter increases faster than the designation of the jets suggests. This increase is independent of fluctuations or manufacturing tolerances, which further complicates a clean gradation between the numbers. When manufacturing the SIP jets for the SI carburetor, we had to decide whether we would make it exactly like DellOrto or if we had all jets manufactured exactly according to the respective designation. We have decided for an exact production according to the given measure. This provides better transferable results and a slightly finer gradation. Unfortunately, this leads to the problem that a tool box equipped with a mixed jet set makes carburetor tuning very difficult. Of course, we recommend simply using the complete jet set from SIP because they are manufactured with the tightest tolerances available on the market. For the switch from DellOrto to SIP jets, we have created a table. With their help can be compared, which corresponds to SIP jet of the respective DellOrto jet:

 

Diameter in mm

Size DellOrto

Size SIP

0,45

45

45

1,19

119

119

1,20

-

120

1,22

120

122

1,25

122

125

1,28

125

128

1,30

-

130

1,31

128

-

1,32

-

132

1,34

130

-

1,35

-

135

1,36

132

-

1,38

135

138

1,40

-

140

1,42

138

142

1,45

140

145

1,48

142

148

1,50

145

150

1,52

-

152

1,54

148

-

1,55

150

155

1,58

152

158

1,60

155

160

1,62

-

162

1,64

158

-

1,65

160

165

 

 

 

Conclusion: Finest quality, perfect value for money and exact sizes are once more available.

 

SIP-TIP: For optimum tuning in the middle and upper rev range order a corresponding mixer tube (e.g. BE4 art no. 40406000) at the same time.

 

OEM numbers (for comparisons): B04576.111 (MALOSSI) 04576111 02 (DELLORTO)

Customers also searched for this product with:

Express Shipping Worldwide DHL, UPS, FEDEX
SIP Aid Scooterists help!
News for you Discover great new products!

Notepad

Get inspired. This product is included in the following public notepads:
Notepad name User Change date Article Note
HF10 HerveF March 4, 2021 35 View notepad
blaue Kleinteileboxen pia98 April 12, 2020 119 View notepad

Loading, please wait
Notepad name
Change date
Products

Questions & answers

Sort by:
Nothing found.

Customer media

Downloads

File name File type Description File size
Vergaser SI Technik SI Vergaser 5,66 MB Download
SI Carburettor technology SI Carburettor technology 2,66 MB Download
near Munich, Germany Visit our Flagship Store
Are you a retailer or would you like to become one?

Report an error

{{ __('contact.report_article.sku', { number: product.articlenumber }) }}
{{ __('form.maximum_text', { count: 500 - formData.message.length, max: 500 }) }}

Report content

Report content

{{ content.title }}

High-res product images

The following list is specifically for journalists interested in using information and pictures from the SIP Scootershop product range for their press coverage. All the materials (text and pictures) available in the download area of this website are subject to the copyright and other intellectual property rights of SIP Scootershop GmbH, Germany, and are offered for journalistic use only. No permission for commercial use!

Permission for any other use is subject to a request to SIP Scootershop GmbH, Marie-Curie-Str. 4, 86899 Landsberg am Lech, Germany, and requires formal written approval by the company.

File name File type File size
{{ item.name }} {{ formatBytes(item.size) }} Download