Select scooter type
Select manufacturer
Select model

Product image for 'Crankcase PINASCO Slave 2.0Title'
Crankcase PINASCO Slave 2.0 for Vespa P200E/PX200 E/Lusso/'98/MY
Part no.: 78245120
€899.00
Including VAT Plus shipping
8,9kg / Piece
Product link copied to the clipboard
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title' Images may differ from the original
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'
Product image for 'Crankcase PINASCO Slave 2.0Title'

Crankcase PINASCO Slave 2.0

for Vespa P200E/​PX200 E/​Lusso/​'98/​MY

also for Vespa 125 VNA-TS/​150 VBA-Super/​160 GS/​180 SS/​Rally/​PX80-150/​PE/​Lusso/​T5
  • with elestart
  • incl. manifold, reed valve, gaskets
 
TUNING SPORT - high-performance and Grade A - perfect repair
 
.
€899.00
2 ratings
Including VAT Plus shipping
8,9kg / Piece

Product description

High-quality crankcase as a replacement or for tuned motors of the Vespa largeframe models.

 

PINASCO offers crankcases in different versions for the Vespa largeframe models.

  • Reinforcements in all particularly stressed areas
  • Lots of material for the design of the transfer ports and the inlet
  • Available as a reed valve version

All of these PINASCO motors are provided with extra cast aluminium material surrounding the transfer ports. This allows them to be safely enlarged avoiding the danger of breaching the casings during enlargement. Another advantage is that a sufficient gasket surface area is still available following tuning work, without having to weld extra material to the casings. The material surrounding the inlet opening has been extended over the centre of the crankshaft area below, also facilitating easier enlargement when preparing the motor for a larger carburettor. The clutch side of the crankcase has also been improved in this way. The aluminium alloy used for these motor casings is of the highest grade which helps prevent twisting and cracking. All cut-outs are 100% true to the original design and are milled from the casings using high-precision CNC machining. These motors have numerous reinforcements where necessary such as the extra material around the flywheel-side drive shaft bearing and surrounding the rear shock-absorber mounting eyelet. These cases are based upon the later PIAGGIO motors including an electric-starter motor and therefore require the e-starter compatible flywheel-cover to be used. The flywheel-side crankshaft bearing opening has been designed to accept the larger, more stable bearing from the Vespa T5 motor and also possesses a lubrication channel making the fitting of an overworked standard PX bearing a thing of the past. These motors are compatible with all suitable stator-plate assemblies, without any extra modification or spacers being needed. Extra locator-studs have also been included to ensure exact and lasting crankcase positioning, essential for high-performance motor set ups. All rubber bushes are produced using a more solid material than standard, which also helps to raise the overall stability under load. The 125-150cc version also benefits from the rubber bushes originally designed for the 200cc type. The rest of the construction is equivalent to that seen on the PX motors that were equipped with an outer drive-shaft oil-seal, ensuring its compatibility with all relevant spares that are available for this later type of motor.

 

The 'Master' crankcases are designed for disc-valve induction type motors and are also laid out to be compatible with the original fuel-oil mix mechanism.

The 'Slave' crankcases possess an inlet port positioned centrally over the gap between the crankshaft webs and are not compatible with the PIAGGIO fuel-oil mix metering system. A PINASCO produced reed-valve manifold assembly including reed-petals, manifold-stuffer, gaskets, connection rubber and manifold comes as part of the delivery. The PINASCO 'Slave’ four-petal reed-valve manifold has dimensions corresponding to those of the manifold included with the YAMAHA RD 350 and with light modification, all RD 350 components can also be fitted to the PINASCO unit. The carburettor manifold consists of a connection rubber and base-plate and is 360° rotatable enabling easier adjustment and positioning. It is compatible with all PHBH 28-30mm / VHS 24-30 / TMX 27-30 and PWK 28-30 carburettors.

The 2.0 version is equipped with a modified oil seal. The large crankshaft bearing on the clutch side is bolted to a plate. The changing of the bearing is possible from the outside. The bearing seat and input shaft are reinforced with additional struts. The engine and selector box gaskets, the silent rubbers for suspension arm and shock absorber as well as the engine and cylinder stud bolts are included in the scope of delivery.Only Pinasco silent rubbers should be used in the Pinasco cases, as the diameter of the seat differs slightly.

 

Conclusion : A lot of high-end motor casing for relatively little money! These brand-new motor casings ensure that in future many more touring and high-end motor tuning projects can be properly and reliably created.

 

SIP- TIP : Do not forget to order suitable gearbox oil, oil-seals, bearings and other necessary fixings. Oil-pump and electric starter covers are also useful for high-performance tuning projects. 'Slave' type motor casings also require a suitable carburettor and air filter.

 

Attention: Pinasco uses a narrower bore for the kick starter shaft than other manufacturers. Unfortunately, none of the kickstarter shafts currently on the market fit. According to Pinasco, old original Piaggio kick starter shafts fit.

OEM numbers (for comparisons): 26482043 (PINASCO)

Customers also searched for this product with:

Express Shipping Worldwide DHL, UPS, FEDEX
SIP Aid Scooterists help!

Exploded views

Select panel:

Product fits

News for you Discover great new products!

Ratings

2 ratings (5 of 5 stars)

Ratings

5 stars
100% Complete
2
4 stars
0% Complete
0
3 stars
0% Complete
0
2 stars
0% Complete
0
1 star
0% Complete
0
Recommended rating

Sehr gutes Motorgehäuse, vom TÜV eingetragen bekommen

Sehr gutes Motorgehäuse, vom TÜV eingetragen bekommen. Ob das überhaupt notwendig war kann ich nicht sagen

Sort:

Customer media

Notepad

Get inspired. This product is included in the following public notepads:
Notepad name User Change date Article Note
Was man braucht Holzape July 4, 2021 12 View notepad
244 SusanneH June 5, 2021 7 View notepad
Motovespa 125 N VT 119134 JurgenS5854 May 11, 2021 3 View notepad
quattrini mihauha May 14, 2021 3 View notepad
M244 HerbertS7528 December 15, 2020 15 View notepad
Motovespa 150 Sprint MichaelG3671 November 10, 2020 2 View notepad

Loading, please wait
Notepad name
Change date
Products

Questions & answers

Sort by:
Nothing found.

Customer media

Downloads

File name File type Description File size
Montage_Getriebe_PX Montage Getriebe PX + Motorgehäuse 6,06 MB Download
Installation of MALOSSI 210cc cylinder Installation of MALOSSI 210cc cylinder 0,65 MB Download
Montage_Kupplung_Cosa Montage Kupplungsbeläge PX 7,92 MB Download
Installation Vespa PX clutch friction plates Installation Vespa PX clutch friction plates 0,43 MB Download
Montage_lager_Kurbelwelle_PX Montage Lager Kurbelwelle PX 12,02 MB Download
Installation crankshaft bearing Vespa PX Installation crankshaft bearing PX 0,78 MB Download
Montage_Schaltkreuz Montage Schaltkreuz PX 6,61 MB Download
Mounting cruciform Mounting cruciform 0,39 MB Download
Montage_Malossi 210ccm Montage Zylinder MALOSSI 210ccm 15,67 MB Download
Tipp_Montage_Zündung Montage Zündung 2,52 MB Download
Ignition installation Ignition installation 0,37 MB Download
near Munich, Germany Visit our Flagship Store
Are you a retailer or would you like to become one?

Report an error

{{ __('contact.report_article.sku', { number: product.articlenumber }) }}
{{ __('form.maximum_text', { count: 500 - formData.message.length, max: 500 }) }}

Report content

Report content

{{ content.title }}

High-res product images

The following list is specifically for journalists interested in using information and pictures from the SIP Scootershop product range for their press coverage. All the materials (text and pictures) available in the download area of this website are subject to the copyright and other intellectual property rights of SIP Scootershop GmbH, Germany, and are offered for journalistic use only. No permission for commercial use!

Permission for any other use is subject to a request to SIP Scootershop GmbH, Marie-Curie-Str. 4, 86899 Landsberg am Lech, Germany, and requires formal written approval by the company.

File name File type File size
{{ item.name }} {{ formatBytes(item.size) }} Download