Select scooter type
Select manufacturer
Select model

Product image for 'Clutch FERODO COSA 2 StandardTitle'
Clutch FERODO COSA 2 Standard for Vespa PX200E Lusso '95->/ '98/MY/Cosa 2 200
Part no.: 93041000
€159.00
Including VAT Free shipping
1,3kg / Piece
Product link copied to the clipboard
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle' Images may differ from the original
Product image for 'Clutch FERODO COSA 2 StandardTitle'
Product image for 'Clutch FERODO COSA 2 StandardTitle'
Product image for 'Clutch FERODO COSA 2 StandardTitle'
Product image for 'Clutch FERODO COSA 2 StandardTitle'
Product image for 'Clutch FERODO COSA 2 StandardTitle'
Product image for 'Clutch FERODO COSA 2 StandardTitle'
Product image for 'Clutch FERODO COSA 2 StandardTitle'

Clutch FERODO COSA 2 Standard

for Vespa PX200E Lusso '95->/​ '98/​MY/​Cosa 2 200

also for Vespa 200 Rally/​P200E/​PX200E/​Lusso/​Cosa 1 200
  • Ø 115 mm
  • 23 teeth
  • 4 plates
  • 8 spring(s)
  • stiffness: L, reinforced
  • with ring
 
TUNING ROAD - for everyday use
€159.00
31 ratings
Including VAT Free shipping
1,3kg / Piece

Product description

PIAGGIO revolutionized the world of large frame motor transmissions with the introduction of the COSA II clutch. All the existing large frame clutch problems were solved almost overnight.

 

Since around 1995 the COSA II clutch has been used in all VESPA PX EFL/'98/MY /'11 and of course, the COSA II models build by PIAGGIO. It comes complete with 4 friction plates, 8 springs and a sturdy clutch basket design. Due to the higher pressure created by the increased number of springs and the increased frictional surface area power can be transmitted more effectively between the crankshaft and the gearbox. Precision laser-cut clutch plates prevent any problems with snagging clutches. No jerking, no slipping, an optimal release point and all that combined with a light, easy clutch lever action, even when using a stronger set of springs.

 

The gear cogs for the COSA II clutch are available with 20, 21, 22 and 23 teeth. The cogs with 20 or 22 teeth fit into 125-150cc motors and the 21 or 23 toothed cogs into the 200cc motors without having to also replace the primary driven gear cog. If, on the other hand, another primary gear cog or the DRT clutch gear cogs are used, more transmission ratios are possible. All VESPA large frame models since the VNA/VNB range up till 1994 can be fitted with the COSA II clutch. With these 125-150cc models the existing clutch cover must either be modified due to the largest size of the COSA II clutch conversion, or replaced with the clutch cover from the 200cc motor with a suitable pressure plate.

The traditional Italian manufacturers NEWFREN and FERODO have a version of the COSA II clutch available with a reinforcement ring welded around the outside diameter of the basket and also springs, stronger than the original items. This 'ringed' version should only be included in motors tuned up to around 15 PS. For all you original VESPA fans we also have the original PIAGGIO version in stock.

 

Helpful Hint: Regrettably the production quality standards of both manufacturers of this clutch system was not always consistent with the high quality we have come to expect from PIAGGIO & CO. We recommend therefore that these clutches only be used, in their standard form at least, in original motor setups. When a reinforcement ring is included, mildly tuned motors can also benefit from this clutch system. If however, the comfort that this clutch system offers cannot be done without - even in a highly tuned machine – the use of another more suitable clutch basket produced by either ourselves, MMW or Scooter & Services is strongly recommended. Attention: Not compatible with PINASCO clutch bush Part.-No. 59366000!

 

Conclusion: Combined with a suitable clutch basket the COSA II clutch remains the absolute recommendation for every VESPA large frame motor.

 

SIP-TIP: When the clutch assembly is completely assembled, prior to mounting on the crankshaft, the 'neck' part of the clutch base plate that connects with the crankshaft itself should protrude 0,5-0,7 mm further towards the rest of the engine than the clutch gear cog to ensure the clutch operates correctly. The somewhat lax manufacturing tolerances of various clutch components can result in this gap being reduced causing the spacer washer to come into contact with the primary drive gear cog, so preventing clutch plate separation. Should you encounter this problem while mounting your clutch we recommend slight modification to your primary drive gear cog with a slight chamfering to a ratio of 2:10 or the use of a suitably modified spacer available at our shop (Art.-Nr.69821000). For inclusion in the more powerful tuning setups the use of a stronger clutch basket is necessary!

 

SIP community user “Klose” on Art.-Nr.28865000: “Recommendable! Fits well and works even better!”

 

SIP community user ‚CSHCSH‘ (über Art.nr.28865000): „It's extremely easy to shift without too much pressure, while giving excellent mid and high end.“

 

 

 

 

SIP-TiPP:  A width of circa 0.5mm play is necessary between the outer edge of the clutch base plate and the clutch gear for exact separation. Tolerances with the clutch check disk as well as the clutch can lead to lowered play. This can cause clutch separation problems.

 

If this separation problem arise; try sanding the clutch gear lightly (2/10 mm) or, much more simple, use the distance washer # 69821000.

EAN Number: 8025832189718

Customers also searched for this product with:

Product video

Express Shipping Worldwide DHL, UPS, FEDEX
SIP Aid Scooterists help!

Exploded views

Select panel:

Product fits

News for you Discover great new products!

Ratings

31 ratings (4.5 of 5 stars)

Ratings

5 stars
70.97% Complete
22
4 stars
16.13% Complete
5
3 stars
0% Complete
0
2 stars
12.9% Complete
4
1 star
0% Complete
0
Recommended rating

Clutch

Very good quality

Sort:

Customer media

Notepad

Get inspired. This product is included in the following public notepads:
Notepad name User Change date Article Note
Micha GregorS May 2, 2021 12 View notepad
bestellt AndreasW May 3, 2021 54 View notepad
bubu10 HenryM May 12, 2021 46 View notepad
bestellt AndreasW April 9, 2021 35 View notepad
bestellt AndreasW March 20, 2021 12 View notepad
bestellt AndreasW March 16, 2021 47 View notepad
Satzinger Martin BerndG March 22, 2021 14 View notepad
Vjatka Bleichi BerndG March 15, 2021 29 View notepad
bestellt AndreasW February 25, 2021 39 View notepad
bestellt AndreasW January 12, 2021 44 View notepad
Cosa 2 StefanP March 19, 2021 27 View notepad
Merkzettel 16.11.2020 PeterS November 16, 2020 8 View notepad

Loading, please wait
Notepad name
Change date
Products

Questions & answers

Sort by:
Nothing found.

Customer media

Downloads

File name File type Description File size
Montage_Kupplung_Cosa Montage Kupplungsbeläge PX 7,92 MB Download
Technik_Kupplung_Neu Technik Kupplung 2,46 MB Download
Primär vernieten PX Primär neu vernieten und Kupplung montieren PX 14,21 MB Download
Clutch technology Clutch technology 2,96 MB Download
Installation Vespa PX clutch friction plates Installation Vespa PX clutch friction plates 0,43 MB Download
Re-rivet primary drive install clutch Re-rivet primary drive install clutch 0,61 MB Download
near Munich, Germany Visit our Flagship Store
Are you a retailer or would you like to become one?

Report an error

{{ __('contact.report_article.sku', { number: product.articlenumber }) }}
{{ __('form.maximum_text', { count: 500 - formData.message.length, max: 500 }) }}

Report content

Report content

{{ content.title }}

High-res product images

The following list is specifically for journalists interested in using information and pictures from the SIP Scootershop product range for their press coverage. All the materials (text and pictures) available in the download area of this website are subject to the copyright and other intellectual property rights of SIP Scootershop GmbH, Germany, and are offered for journalistic use only. No permission for commercial use!

Permission for any other use is subject to a request to SIP Scootershop GmbH, Marie-Curie-Str. 4, 86899 Landsberg am Lech, Germany, and requires formal written approval by the company.

File name File type File size
{{ item.name }} {{ formatBytes(item.size) }} Download