Brake Calliper BREMBO, front
for Vespa LX/LXV/S 50-150ccm
- incl. ZELIONI brake calliper adapter, silver
For race use only. Not admitted in the area of the German StVZO!
It is well known that the braking performance provided by the original brake system found on all modern smallframe Vespa models leaves a lot to be desired. This deficit makes itself especially noticeable while travelling in heavy urban traffic, with all its potential dangers.
We can provide a solution in the form of a BREMBO two-piston brake calliper, including a specially formed adapter for easy fitting. The new calliper is simply bolted in position, using the adapter, replacing the original item. Due to its increased size longer fixing bolts are necessary, two M8 x 30mm (#M30001200) and also two M8 x 25mm (#27159600). Four M8 self-locking nuts (#PI200800) will also be required.
Attention : This performance brake calliper can only be used in combination with a ZELIONI 'Oversize' brake disc (#ZELDB05FP).
SIP-TIP : Do not forget to order the nuts, bolts and brake disc that are necessary in order to properly use this calliper. A suitable steel braided brake hose also heightens the effectiveness of this brake upgrade.
General mounting information: We strongly recommend that 'Loctite ? Medium strength' thread lock liquid be applied to the threads on the bolts between the brake callipers, adapter, engine-casings and axle mounting. They should then be correctly tightened to the relevant torque values required using a decent torque wrench. Original or replacement nuts and bolts should have a 10.9 solidity rating.