22910 Gäste, 1287 Mitglieder online.

community Forum

Nicht beantwortet 24165000 Racing exhaust SIP ROAD on Rally 200 with Autolube - what main jet SiP Tech ?


Letzter Beitrag Di, Aug 30 2011 20:40 von Hamer. 5 Antworten.
  • Mo, Jul 25 2011 21:21

    • Hamer
    • Top 500 Mitwirkender
    • Registriert am
      Do, Mrz 19 2009
    • SIP Power User
    • CashPoints 1.060

    24165000 Racing exhaust SIP ROAD on Rally 200 with Autolube - what main jet SiP Tech ?


    Hi guys, I have sold my SiP Road to a friend with a standard Rally 200 Autolube - what main jet should he use and also he has 2 air filters one is not drilled above the jet stack and the other has a 4 mm hole - which should he use ? I have told him I'll fit it and sort the jetting etc.

    • CashPoints: 5
    • IP-Adresse ist 86.152.155.199
  • Sa, Jul 30 2011 0:45 Antwort zu

    • Hamer
    • Top 500 Mitwirkender
    • Registriert am
      Do, Mrz 19 2009
    • SIP Power User
    • CashPoints 1.060

    SiP Tech ? Hello ? Are you out there ??????


    Any chance of some simple advice on one of your own products guys ? Sip Road exhaust on a standard rally 200 with autolube = what main jet size please ?

    • CashPoints: 5
    • IP-Adresse ist 86.132.15.247
  • Sa, Aug 27 2011 11:27 Antwort zu

    • Hamer
    • Top 500 Mitwirkender
    • Registriert am
      Do, Mrz 19 2009
    • SIP Power User
    • CashPoints 1.060

    Re: SiP Tech ? Hello ? Are you out there ??????


    one month and no replies ??

    • CashPoints: 6
    • IP-Adresse ist 86.155.18.158
  • So, Aug 28 2011 9:07 Antwort zu

    Re: SiP Tech ? Hello ? Are you out there ??????


    I think you might need to do some plug chops if you want to get this right. 

     

    FYI, a friend with the same setup (but no holes in the air filter) runs a 120 main jet. I have holes in the air filter and run a 125 main jet. Recently I needed to upjet to 128 for some of that shitty E10 petrol in Sweden.

     

    The rest of the jetting should be stock, just remember to tweak the a/f screw a little.

    • CashPoints: 6
    • IP-Adresse ist 84.215.174.65
  • Di, Aug 30 2011 9:37 Antwort zu

    AW: Re: SiP Tech ? Hello ? Are you out there ??????


    Hi,

     

    you should normally use about 10% higher jetting 122-130.

     

    But If you are on sea level use a 132 or 135.

     

    8mm Hole in the air cleaner bottom above the main Jet  is a must

     

     

     

    regards

    Like my service? You can select me, by ordering, as your preferred customer consultant in the webshop.

    • CashPoints: 6
    • IP-Adresse ist 80.149.72.146
  • Di, Aug 30 2011 20:40 Antwort zu

    • Hamer
    • Top 500 Mitwirkender
    • Registriert am
      Do, Mrz 19 2009
    • SIP Power User
    • CashPoints 1.060

    Re: AW: Re: SiP Tech ? Hello ? Are you out there ??????


    Thank you Magnus and  - finally - SipTech ! I will use my drilled filter and start at 135 , do some plug chops and see what happens.

    • CashPoints: 5
    • IP-Adresse ist 86.130.152.154
Seite 1 von 1 (6 Treffer) |