You are here:
WebshopVespa Smal...Spare Part...Gaskets, O...Oil Seal crankshaft flywheel
 Your Shopping Cart
Your shopping cart is empty.
calculate shipping Live! Shipping Costs Calculation
 Your Notepads
notepad icon  Please login to use the Notepads.
webshop icon All Webshop
Your Scooter
Show only articles for selected scooter.
Most Popular Articles

prev Pictures may look differentnext

Oil Seal crankshaft flywheel

for Vespa PK50 XL/N Plurimatic
45x60x5,5 mm

Radial shaft oil seals should be installed firmly into the crankcase for a tight and secure fit. The inner circumference of the ring is the contact point to the rotating shaft and is mostly held in place with a circular spring to keep it sealed tight around the shaft. These items wear out regularly and should be replaced during every service of your motor. If the motor has not been run for a while the seals could be damaged. If the revs of your motor increase while it should be ticking over, the oil seal on the flywheel side of the crankshaft is probably defective or damaged. If you discover fuel mixed with your gearbox oil, the oil seal that sits on the clutch side of the crankshaft is the likely suspect.

We have oil seals produced by several manufacturers available, constructed using a variety of materials. The blue and black versions are made of a synthetic rubber, the blue type mostly produced by CORTECO are a little tougher than the black type which can be found in most engines as an original PIAGGIO component. The brown seals are produced using a fluoro polymer material (FPM) are especially heat resistant (up to 160°) are harder wearing with more resistance against oil. Both types see wide spread use in all two -stroke motors.

Here at SIP there is no consensus amongst us as to which type is best, so we have solved this problem as PIAGGIO has done and stock all colours and types to keep everybody happy.

Helpful hint: As a rule of thumb, to ensure correct positioning of your fresh oil seals, the 'open' side of the seal always faces towards the one of the chambers that it separates, with the higher pressure. This higher pressure also helps the inner circumference maintain the seal to the shaft by pushing the inner edge against it.


SIP-TIP: Loctite oil seal adhesive keeps oil seals in place effectively, even in worn crankcases.

OEM Numbers (for the purpose of comparison)  236317 (PIAGGIO)

Customers also searched for this article with:  oilseal

Customers choice
might interest you...
92014000 $19.18
22253600 $10.93
22266600 $18.18
87311000 $3.58
91045000 $4.59

10g / piece
Stock on hand   Amount

  • facebook
    • Share on Facebook!
  • twitter
    • Send a tweet on Twitter!

Your options
Pages(s) 164 to open.
Catalog Preview Page
Product forums
icon scootermodels This product fits the following models
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
VESPA PK 50 XL N Plurimatic / Automatica 50 V5P1-2 2T AC `89-`90 flywheel side
VESPA PK 50 XL Plurimatic / Elestart 50 VA52T 2T AC `86-`90 flywheel side

Legend: Quantity In Stock

This article is in stock and ready to be shipped immediately. Our warehouse is fully stocked.
This article is in stock. This item is in stock in sufficient quantity.
This article will soon be sold out. This item will be sold out soon.
This item is ordered by us especially for you. Deliverytime might take more than 3 weeks. You cannot cancel this order any more. This item needs to be ordered especially for you. The expected delivery time is about 3 weeks.
This article is currently not available but will be back in stock soon. This item is currently not available but will be back in stock soon.
This article is currently not available. This item is currently not available. You can order it nevertheless. The expected delivery time is about 3 weeks.