DE

EN

FR

NL

IT

ES

GR

CS

PT

JP

PL

HU
 
You are here:
WebshopVespa Smal...Spare Part...Gaskets, O...Oil Seal crankshaft clutch
 Your Shopping Cart
Your shopping cart is empty.
calculate shipping Live! Shipping Costs Calculation
 Your Notepads
notepad icon  Please login to use the Notepads.
webshop icon All Webshop
Your Scooter
Show only articles for selected scooter.
Most Popular Articles

 
SIP EuroFlat Banner
prev Pictures may look differentnext

Oil Seal crankshaft clutch

side
for Vespa 50-125/PV/ET3/PK50
-125/S/XL/XL2/Ape 50,
POLINI, PTFE, 22,7x47,05x7x7,5
mm, blue

Radial shaft oil seals should be installed firmly into the crankcase for a tight and secure fit. The inner circumference of the ring is the contact point to the rotating shaft and is mostly held in place with a circular spring to keep it sealed tight around the shaft. These items wear out regularly and should be replaced during every service of your motor. If the motor has not been run for a while the seals could be damaged. If the revs of your motor increase while it should be ticking over, the oil seal on the flywheel side of the crankshaft is probably defective or damaged. If you discover fuel mixed with your gearbox oil, the oil seal that sits on the clutch side of the crankshaft is the likely suspect.

We have oil seals produced by several manufacturers available, constructed using a variety of materials. The blue and black versions are made of a synthetic rubber, the blue type mostly produced by CORTECO are a little tougher than the black type which can be found in most engines as an original PIAGGIO component. The brown seals are produced using a fluoro polymer material (FPM) are especially heat resistant (up to 160°) are harder wearing with more resistance against oil. Both types see wide spread use in all two -stroke motors.

Here at SIP there is no consensus amongst us as to which type is best, so we have solved this problem as PIAGGIO has done and stock all colours and types to keep everybody happy.

Helpful hint: As a rule of thumb, to ensure correct positioning of your fresh oil seals, the 'open' side of the seal always faces towards the one of the chambers that it separates, with the higher pressure. This higher pressure also helps the inner circumference maintain the seal to the shaft by pushing the inner edge against it.

 

SIP-TIP: Loctite oil seal adhesive keeps oil seals in place effectively, even in worn crankcases.


OEM Numbers (for the purpose of comparison)  285.0139 (POLINI)


Customers also searched for this article with:  oilseal


icon explos Spare Parts Catalogue
This article can be found in the following exploded drawings ... go Go to Exploded Drawings!
Recommendations
Accessories
zoom 
23589000 $17.00
Our Alternatives
for this item
zoom 
87311200 $4.65
zoom 
87311500 $6.44
zoom 
87311000 $3.49
Customers choice
might interest you...
zoom 
15582000 $10.64
zoom 
88510000 $1.16
zoom 
P2850137 $10.91

 
$10.91
Art.No.
87311600
28g / piece
Stock on hand   Amount

share
  • facebook
    • Share on Facebook!
  • twitter
    • Send a tweet on Twitter!

Your options
Product forums
 
icon scootermodels This product fits the following models
  APRILIA
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
APRILIA SR 150 2T AC `99-
APRILIA SR 125 2T AC `99-
  GILERA
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
GILERA Runner FX DD 125 ZAPM07 2T LC ´99-´03
GILERA Runner FX DT 125 ZAPM07 2T LC `97-`99
GILERA TPH-X/ -XR 125 2T AC `99-`00
  ITALJET
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
ITALJET Dragster 125 2T LC -
  PIAGGIO
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
PIAGGIO APE 50 50 TL1-2T 2T AC `69-`80
PIAGGIO APE 50 FL / FL2 50 TL6T 2T AC `89-
PIAGGIO APE 50 FL3 50 TL5T 2T AC `96-
PIAGGIO APE P 50 ( Vespa Car ) 50 TL3T 2T AC `80-
PIAGGIO APE TM P 50 / Elestart 50 TL4T 2T AC `85-
PIAGGIO Hexagon 125 EXS1T 2T LC `94-`97
PIAGGIO Hexagon 150 EXV1T 2T LC `94-`97
PIAGGIO Hexagon LX 125 ZAPM05 2T LC `98-`99
PIAGGIO Skipper / SKR 150 2T AC `94-`97
PIAGGIO Skipper / SKR 125 ZAPM/CSM 2T AC `94-`97
PIAGGIO Skipper LX 125 2T AC `98-`99
PIAGGIO Skipper LXT 150 2T AC `98-`99
  VESPA
divider Producer/Model divider cc divider Type divider Engine divider Yr. of Const. divider Extra
VESPA 50 / N 50 V5A1T 2T AC `63-`71
VESPA 50 L 50 V5A1T 2T AC `66-70
VESPA 50 R 50 V5A1T 2T AC `69-`83
VESPA 50 S 50 V5SA1T 2T AC `63-`84
VESPA 50 Special 50 V5A2T 2T AC '69-'72
VESPA 50 Special 50 V5B1T 2T AC '72-'75
VESPA 50 Special 50 V5B3T 2T AC '75-'83
VESPA 50 Special Elestart 50 V5B4T 2T AC '75-'76
VESPA 50 Special Elestart 50 V5B2T 2T AC `72-`75
VESPA 50 Special Elestart 50 V5A3T 2T AC '69-'72
VESPA 50 SR / Sprinter 50 V5SS2T 2T AC `71-`79
VESPA 50 SS / Super Sprint 50 V5SS1T 2T AC `65-`71
VESPA 90 90 V9A1T 2T AC `63-`84
VESPA 90 Racer 90 V9SS2T 2T AC `71-`74
VESPA 90 SS Super Sprint 90 V9SS1T 2T AC `65-`71
VESPA 100 (UK) / 100 Sport (US) 100 V9B1T 2T AC `78-`90
VESPA 125 125 VMA1T 2T AC `65-`67
VESPA 125 Primavera 125 VMA2T 2T AC `67-`83
VESPA 125 Primavera ET3 125 VMB1T 2T AC `76-`90
VESPA PK 50 50 V5X1T 2T AC `82-`84
VESPA PK 50 S / Elestart 50 V5X2T 2T AC `82-`84
VESPA PK 50 S Lusso / Elestart 50 V5X2T 2T AC `85-`88
VESPA PK 50 SS / Elestart 50 V5S1T 2T AC `83-`86
VESPA PK 50 XL / Elestart 50 V5X3T 2T AC `85-`90
VESPA PK 50 XL FL 50 V5N1T 2T AC `90-
VESPA PK 50 XL HP 50 V5N2T 2T AC `91-`91
VESPA PK 50 XL N NUOVA 50 V5X5T 2T AC `89-`90
VESPA PK 50 XL Rush / Elestart 50 V5X4T 2T AC `88-`90
VESPA PK 50 XL2 / Elestart 50 V5X3T 2T AC `90-
VESPA PK 50 XLS 50 V5S2 2T AC `86-
VESPA PK 80 S / Elestart 80 V8X5T 2T AC `82-`86
VESPA PK 80 S Lusso / Elestart 80 V8X5T 2T AC `85-`88
VESPA PK100 S / Elestart 100 V9X1T 2T AC `82-`84
VESPA PK100 XL 100 V9X2T 2T AC `86-`90
VESPA PK125 125 VMX1T 2T AC `82-`85
VESPA PK125 ETS / Elestart 125 VMS1T 2T AC `84-`85
VESPA PK125 N NUOVO (FL) 125 VMX7T 2T AC `90-`91
VESPA PK125 S / Elestart 125 VMX5T 2T AC `82-`84
VESPA PK125 XL / Elestart 125 VMX6T 2T AC `86-`90
VESPA PK125 XL2 125 VMX6T 2T AC `90-

Legend: Quantity In Stock
close

This article is in stock and ready to be shipped immediately. Our warehouse is fully stocked.
This article is in stock. This item is in stock in sufficient quantity.
This article will soon be sold out. This item will be sold out soon.
This item is ordered by us especially for you. Deliverytime might take more than 3 weeks. You cannot cancel this order any more. This item needs to be ordered especially for you. The expected delivery time is about 3 weeks.
This article is currently not available but will be back in stock soon. This item is currently not available but will be back in stock soon.
This article is currently not available. This item is currently not available. You can order it nevertheless. The expected delivery time is about 3 weeks.