Intake Manifold SERIE PRO
for SHB 16.15/16.16, for Vespa
inner diameter: 16mm, outer
diameter: 21,5mm, 3-hole,
incl. reed valve block, fixed
with 2 screws
If the sealing surface of the disc valve intake is damaged it is not possible for sufficient pressure to be created to take the gas mix into the combustion chamber. The scooter will not start and does not have sufficient idling mix. To eliminate this defect without having to change the original 50cc setup or having to get a new crankcase, in the SERIE PRO range with the reed valve manifold we now finally offer a solid solution for the repair of the damaged disc valve sealing surface especially for the DELL'ORTO SHB 16.10 and the PK 50. The reed valve manifold can simply be screwed on without any modifications to the engine or the chassis. It completes the task of the defective disc valve control and the Vespa runs again. The intake manifold is available with 2 or 3 hole attachment.
Conclusion: A rapid solution with a damaged disc valve intake.
SIP-man Pierre on part no 21500100:
"Plug&Play. There is no easier way or repairing a broken disc valve."
This manifold is only fixed with two bolts, the third hole will simply be put out of service.
Customers also searched for this article with:
inlet manifold, carburator manifold