29841 Gäste, 415 Mitglieder online.

community Forum

86134000 Wiring harness Sprint/Rally/ SS180/GTR/GT/TS/GS4/V50/PV/ET3 for conversion electronic ign. without battery/indicator


Letzter Beitrag Fr, Feb 2 2018 0:13 von Crackers. 9 Antworten.
  • Fr, Feb 2 2018 0:13 Antwort zu

    missing rear light wire?


    please can you advise why there is one wire missing for the rear light and what colour/connection this should be?
    • CashPoints: 5
    • IP-Adresse ist 46.163.102.230
  • Sa, Sep 23 2017 8:13 Antwort zu

    Top quality
    • CashPoints: 5
    • IP-Adresse ist 46.163.102.230
  • Sa, Mrz 11 2017 10:27 Antwort zu

    • skufner
    • Top 500 Mitwirkender
    • Registriert am
      Fr, Sep 15 2006
    • SIP Power User
    • CashPoints 698

    geht so


    Grundsätzlich gut verarbeitet, aber leider sind die Kabelfarben nicht Vespa-typisch, und es wurde an der Masseleitung gespart - da kann man drauf warten, dass das Rueck-/Bremslicht nicht funktioniert. Am besten selbst ein zusaetzliches Kabel reinziehen.
    • CashPoints: 5
    • IP-Adresse ist 46.163.102.230
  • Sa, Dez 31 2016 23:13 Antwort zu

    does not have a tail light wire


    Beware, this harness while simple and good quality does not have a tail light wire for some reason. I was able to add one buy fishing a wire down the sleeve and soldering it into the harness. Its a simple harness to set up if your restoring an old frame. I am using this on a 64VBB that I am putting a P200 motor into. No instructions, no diagram so be prepared to use your head! It's simple and easy to figure out.
    • CashPoints: 5
    • IP-Adresse ist 46.163.102.230
  • So, Apr 17 2016 17:59 Antwort zu

    Re: great


    I give up on this loom. I can work out the engine end, but the headset? There are only 4 wires going to the switch? How have you wired the headset?

    lease help!

    • CashPoints: 5
    • IP-Adresse ist 94.6.224.100
  • Do, Mrz 24 2016 13:08 Antwort zu

    Good but it comes without the wiring diagram.
    • CashPoints: 5
    • IP-Adresse ist 46.163.102.230
  • Fr, Okt 11 2013 19:13 Antwort zu

    Re: 86134000 Wiring harness Sprint/Rally/SS180/GTR/GT/TS/GS4/V50/PV/ET3for conversion electronic ign.without battery/indicator


    I have to agree!

    connecting the wire loom to the light switch is unclear.

    I still haven't found the correct way how to connect it, which color cable goes where?

    Need help!

     

    • CashPoints: 5
    • IP-Adresse ist 145.53.209.194
  • Do, Dez 8 2011 5:44 Antwort zu

    easily the best and simplest wiring harness I have ever installed. Ive installed about 6 of these now, in different scooters, and they work great every time
    • CashPoints: 6
    • IP-Adresse ist 127.0.0.1
  • Mo, Okt 9 2006 18:06

    86134000 Wiring harness Sprint/Rally/ SS180/GTR/GT/TS/GS4/V50/PV/ET3 for conversion electronic ign. without battery/indicator


    Difficult to install
     Wire gauge is very thick making the entire harness difficult to install. wiring diagram is not clear. After several attempts the handlebar switch melted. I think further research is needed for this product.
    • CashPoints: 13
Seite 1 von 1 (10 Treffer) |